Who send HUMMER to Shanghai?haha.....

[Bayonet]

Maybe it's the first hummer in Shnaghai,China.....

Someone told me that it is an OEM product.....

so can someone tell me the difference between this hummer and hummers sold in American????? rofl http://img.bbs1.tom.com/upload_img/53/200403/pic_1079524393.jpg

BACK
http://img.bbs1.tom.com/upload_img/53/200403/pic_1079524433.jpg

Inside
http://img.bbs1.tom.com/upload_img/53/200403/pic_1079524512.jpg

http://img.bbs1.tom.com/upload_img/53/200403/pic_1079524595.jpg

[pipaz]

look cloasser and see for your self ;)

[Operation Ivy]

ours are much cooler? :D

[Seraphim]

This thread was crap when it was made 3months back.

[SmOg]

:roll: Hmm....i think its built by Dong'Feng, with inported HUMMER chassis and its name is "iron horse"..lol...chinese special edition, yea? p-) ...
in a not too distant future, sure they will be able to mass produce it just like that crappy BJ212/202...... :petting:

[soma]

Simply put everyone is cashing in on American greatness :D

That or the Chinese/Norinco are engineering idiots.

[ZeroPositive]

Go Make your own Nike's Yank :D

[Midtown]

Go Make your own Nike's Yank :D

haha valid point.

[ZeroPositive]

upon saying that... I looked at my Royal Robbins 5.11 gear the vest is made in Cambodia...
Trousers in Vietnam...
Shirt in Hong Kong...

All the BHI stuff is made in Vietnam....
So when I get anything made in the Good Old US of A I treat it like a collectors item :D
*cleans and polishes Danner boots.*

[droopy]

upon saying that... I looked at my Royal Robbins 5.11 gear the vest is made in Cambodia...
Trousers in Vietnam...
Shirt in Hong Kong...

All the BHI stuff is made in Vietnam....
So when I get anything made in the Good Old US of A I treat it like a collectors item :D
*cleans and polishes Danner boots.*
In US a worker is payed maybe 8$/hour and in Vietnam 1$/hour or something like that guess where will you make a bigger profit ;)

[LordHalbert]

Looks like a hummer to me.

[Moledet]

Looks like a hummer to me.
You need to have your eyes checked.
That's a real hummer:
http://www.isayeret.com/vehicles/hummer/hummer.htm

[stuntman]

Go Make your own Nike's Yank :D

haha valid point.
Your kidding right? If we were to pull a third of our industry out of Mamasan China, it would slow the asian economy significantly! So again your kidding right?

[m230e1]

IT's not even a Hummer

[Durandal]

Man that thing is soooo cheap looking.

Stuff like this does not bother me. Its when China rips off the AR then produces their own IDENTICAL copies THEN licenses it to Iran and sets up a factory there.

Then I get pissed.

This however is simply a mediocre design wanting to be greatness...

So, Bayonet, I have a question for you. Is the explosion of car ownership (car being ANY four wheeled vehicles be it car, van, or truck) as great as I hear it is?

[Trigger]

http://img23.imageshack.us/img23/1159/ModelHummer.jpg p-)

[seruriermarshal]

http://img23.imageshack.us/img23/1159/ModelHummer.jpg p-)

rofl

[Raistlin]

OK, I still haven't figured out from this thread whether it's a real hummer...

[DPGLAW]

Jesus Christ!!!!!......Is there anything those stupidass chinese don't copy from us. They have to be the most un-original and unmotivated ethnicity I have ever seen.....At least when it comes to building military equipment. I guess that whole notion of the Chinese being smarter than us here in the US is complete bull****. If it were true than mabye they would have an original idea.

[usa320]

Its a chinese rip-off of the Hummer.

ANd lots not confuse a Hummer with an HMMWV.

[Bayonet]

Thank you Sm0g,your answer is right

This hummer is produced by dongfeng which cooperate with american company.....it's not a rip off, u american allow us to produce it..... rofl

[Bayonet]

To Durandal
sorry ,i can't understand your question clearly because of my poor English.........haha rofl

[LordHalbert]

So what's the differnece between a hummer and a HMMWV - same thing right?

[Bayonet]

I try to translate it into English,,,,,

it's too difficult , just guess it
rofl
东风EQ2058 standard
　　
　　measure（mm）


lengthXbredthXheight 4970X2134X1960
　　
　　axis l3300
　　
　　distance between fron wheels and back wheels 前／后1820／1820
　　
　　the miniest distance between vehicle 406
　　
　　weight（kg）3250
　　
　　engine 型式V8，增压柴油机
　　
　　排量(mL）6489
　　
　　biggest power（kw／r／min）145／3000
　　
　　最大扭矩（Nm／r／min）583／1600
　　
　　悬架前／后双横臂独立悬架
　　
　　制动器前／后通风盘力
　　
　　转向器变速比动力转向
　　
　　automatica gear 4速
　　
　　分动器两档全时四轮驱动
　　
　　轮胎37X12.5R16.5；
　　
　　Highest speed（km／h）134
　　
　　接近角72
　　
　　离去角34
　　
　　纵向通过角33
　　
　　grade(%)60
　　
　　side grade(%)40
　　
　　cross over trench (mm)850
　　
　　depth of water(mm)760
　　
　　apeak height of crossing (mm)440

[Falco]

So what's the differnece between a hummer and a HMMWV - same thing right?

the HMMWV is the original military truck and the Hummer is the civillian variant

[chengwudi]

dongfeng armour
http://www.cjdby.com/showimg.asp?BoardID=6&filename=2004-6/2004615232623855.jpg

http://www.cjdby.com/showimg.asp?BoardID=6&filename=2004-6/2004615232730556.jpg

http://www.cjdby.com/showimg.asp?BoardID=6&filename=2004-6/200461523293586.jpg

http://www.cjdby.com/showimg.asp?BoardID=6&filename=2004-6/2004615233049930.jpg

http://www.cjdby.com/showimg.asp?BoardID=6&filename=2004-6/2004615233456254.jpg

http://www.cjdby.com/showimg.asp?BoardID=6&filename=2004-6/2004615233544782.jpg

[Aripin11830]

dongfeng armour


No pictures, Chengwudi !
Only red-Xs :(

Cheers,
Aripin

[chengwudi]

dongfeng armour


No pictures, Chengwudi !
Only red-Xs :(

Cheers,
Aripin
i'm sorry.it's ok now !I post it again :D

[Macs.]

To Durandal
sorry ,i can't understand your question clearly because of my poor English.........haha rofl

You like that green smiley, don't you ?

[Bayonet]

yes , i like it.....?????

[GrimmyRX]

Jesus Christ!!!!!......Is there anything those stupidass chinese don't copy from us. They have to be the most un-original and unmotivated ethnicity I have ever seen.....At least when it comes to building military equipment. I guess that whole notion of the Chinese being smarter than us here in the US is complete bull****. If it were true than mabye they would have an original idea.

When building military equipment, one has to keep a couple of things in mind: 1) Physics and 2) Has it already been done?

If it has, and the frame is known to be the best in the world, well, why waste money trying to re-invent the wheel?

I'd say, screw that crap. Copy that for now while sinking money into inventing something that can surpass. And, at the rate China is going, it WILL surpass sooner or later.

[Seraphim]

Jesus Christ!!!!!......Is there anything those stupidass chinese don't copy from us. They have to be the most un-original and unmotivated ethnicity I have ever seen.....At least when it comes to building military equipment. I guess that whole notion of the Chinese being smarter than us here in the US is complete bull****. If it were true than mabye they would have an original idea.

When building military equipment, one has to keep a couple of things in mind: 1) Physics and 2) Has it already been done?

If it has, and the frame is known to be the best in the world, well, why waste money trying to re-invent the wheel?

I'd say, screw that crap. Copy that for now while sinking money into inventing something that can surpass. And, at the rate China is going, it WILL surpass sooner or later.

Agreed

[KalleBalleSvartSk@lle]

Hummers aren't really rocket science...
Neither are AR:s
Copying of existing stuff is widespread, it's just that all doesn't make it as obvious as others.

[Bayonet]

Jesus Christ!!!!!......Is there anything those stupidass chinese don't copy from us. They have to be the most un-original and unmotivated ethnicity I have ever seen.....At least when it comes to building military equipment. I guess that whole notion of the Chinese being smarter than us here in the US is complete bull****. If it were true than mabye they would have an original idea.

When building military equipment, one has to keep a couple of things in mind: 1) Physics and 2) Has it already been done?

If it has, and the frame is known to be the best in the world, well, why waste money trying to re-invent the wheel?

I'd say, screw that crap. Copy that for now while sinking money into inventing something that can surpass. And, at the rate China is going, it WILL surpass sooner or later.



I agree with u

[meon]

no , it name's "iron horse ", design in china , made in china. :bash: