Pictures of your airsoft rifle

[Kilo1-1]

Same here.. Plus I have my other reasons.. But your M4 does really look sick..

If you dont like the crane do what I did.. Battery Still consealed and yet very nice!!
http://www.militaryphotos.net/forums/showpost.php?p=1623529&postcount=236

Hey, I never thought of using a mag shell to cover it like that, good thinking. I was to do that, I'd probably use a real Ar-15 mag and gut it like that, as I don't have any broken AEG Mags to use as the donor.

[THE JACKAL]

Ya I have a couple of M16 mags.. But they are still good, i didn't want to waste them..

But ya, go for it dude.. It rocks!!

[p51]

if youre recreating, i would have suggested getting the M203 that mounts to the gun itself not the rail
but its too late
But that's the way the real weapon was. I remember clearly having to remove the M203 quickly for some reason and it was clearly attached to the lower rail.

Same here.. Plus I have my other reasons.. But your M4 does really look sick..

If you dont like the crane do what I did.. Battery Still consealed and yet very nice!!
http://www.militaryphotos.net/forums/showpost.php?p=1623529&postcount=236
Wow, smooth idea, I never thought of doing that! Y'know, one of those cheap low caps would be perfect for that, or maybe a real mag that has been damaged...
Hmmm...

[Brakoo]

But that's the way the real weapon was. I remember clearly having to remove the M203 quickly for some reason and it was clearly attached to the lower rail.

Wow, smooth idea, I never thought of doing that! Y'know, one of those cheap low caps would be perfect for that, or maybe a real mag that has been damaged...
Hmmm...

For all I know there is not any M203 launcher that is mounted on a rail, not in real steel anyway.

[xEDGEx]

It rocks!!

The other super nifty thing about an external battery rig (one of my M4s is 'semi' external) is in a worst case scenario, you can fit any size battery (as long as you've got the right connector). It SURE beats being slave to PEQ-sized batts, or even worse the Crane stock ones that are $50-60 a piece.

[LeMonjello]

For all I know there is not any M203 launcher that is mounted on a rail, not in real steel anyway.

FYI: Rail mounted M203's do exist...manufactured by LM&T. Even without the rail mount, M203's can be removed in a second using the QD clip.


Even though I'm not a fan of the Marine Corps trades on a M4 (as they dont exist on receivers in reality), that still looks really really good.

The MARINE ENV. receiver is very real and most certainly does exist.

I think there were threads dedicated over the discussion of both topics.

[xEDGEx]

He still put forth the effor to get SOME kind of M203, right? A for effort, p51.

As long as you're cool with it!!!

[THE JACKAL]

Well it actually looks like it is on the rail.. But i can't tell and I don't know..

But It dont matter, because it looks like it..

http://media.militaryphotos.net/photos/albums/82nd_Airborne_Division/82nd_389.jpg

Pic..
http://media.militaryphotos.net/photos/82nd_Airborne_Division/1034702363_3691069473

Another pic..
http://media.militaryphotos.net/photos/82nd_Airborne_Division/82nd_more8

Another pic..
http://media.militaryphotos.net/photos/82nd_Airborne_Division/4_G

[Kilo1-1]

The MARINE ENV. receiver is very real and most certainly does exist.

I think there were threads dedicated over the discussion of both topics.

Are you sure? Currently, the Marine Corps M4s are made by Colt (with the Colt trades), and their M16A4s are made by Colt and FN. The A4s either have the Colt or FN trademarks. If you could get some actual Marine ENV receiver pictures and show me, I'll greatly appreciate it.

[TacoDelRio]

The reciever exists, I don't think the USMC uses it. It's all a sales thing. You'll see someday. :)

[ShakesFIST]

Well it actually looks like it is on the rail.. But i can't tell and I don't know..

But It dont matter, because it looks like it..

http://media.militaryphotos.net/photos/albums/82nd_Airborne_Division/82nd_389.jpg

Pic..
http://media.militaryphotos.net/photos/82nd_Airborne_Division/1034702363_3691069473

Another pic..
http://media.militaryphotos.net/photos/82nd_Airborne_Division/82nd_more8

Another pic..
http://media.militaryphotos.net/photos/82nd_Airborne_Division/4_G

I's mounted on the barrel (you can see the latch in front of the front sight post). The lower rail is removed and the 203 is put on.

[TacoDelRio]

I don't think the RIS-mounted M203's are in use by US forces, unless it's SOF, but they can basically mount whatever the hell they want to wherever the hell they want, because they are "gangster like that". The RIS models give you the advantage of mounting an M203 to a shorter barrel weapon that doens't have the M203 step-down on the barrel, like on 10.5in uppers where you don't have enough barrel to mount the front launcher mount ring deal on.

First person on here to mount a QD M203 to an HK Mk23 wins a virtual cookie.

[LeMonjello]

Are you sure? Currently, the Marine Corps M4s are made by Colt (with the Colt trades), and their M16A4s are made by Colt and FN. The A4s either have the Colt or FN trademarks. If you could get some actual Marine ENV receiver pictures and show me, I'll greatly appreciate it.

http://www.militaryphotos.net/forums/showthread.php?t=69678


I don't think the RIS-mounted M203's are in use by US forces, unless it's SOF, but they can basically mount whatever the hell they want to wherever the hell they want, because they are "gangster like that". The RIS models give you the advantage of mounting an M203 to a shorter barrel weapon that doens't have the M203 step-down on the barrel, like on 10.5in uppers where you don't have enough barrel to mount the front launcher mount ring deal on.

First person on here to mount a QD M203 to an HK Mk23 wins a virtual cookie.

Also, standard M203's will not mount to one piece free float tubes. I've heard that SOF still use M79 or HK69; I'm not sure if this is true. Something about the M203 not being able to handle specific 40mm rounds?

[TacoDelRio]

http://www.militaryphotos.net/forums/showthread.php?t=69678



Also, standard M203's will not mount to one piece free float tubes. I've heard that SOF still use M79 or HK69; I'm not sure if this is true. Something about the M203 not being able to handle specific 40mm rounds?

M203 slides to the rear, while the M79 cracks open like a break-aciton shotgun. You can load whatever length 40mm round into an M79, whereas M203's only accept shorter rounds. LMT's M203 opens up wider/longer than COLT/other M203's.

Not alot of guys using weapons with one-piece free float tubes (SPR's) have a "need" for a 203, so that kinda works out.

[LeMonjello]

M203 slides to the rear, while the M79 cracks open like a break-aciton shotgun. You can load whatever length 40mm round into an M79, whereas M203's only accept shorter rounds. LMT's M203 opens up wider/longer than COLT/other M203's.

Not alot of guys using weapons with one-piece free float tubes (SPR's) have a "need" for a 203, so that kinda works out.

It has nothing to do with the way it loads, rather the pressure created by the round. Again, from my limited understanding of 40mm, the pressure created by the round can't be handled well by M203's. From what i read, the M79 uses a different way to vent these pressures and as a result, more accurate and more range. AGAIN, this is "internet" talk and not sure if this is true; I'll try to dig up the article I read. I do remember reading that US Armed Forces in Iraq/Afghanistan were in need of surplus M79 parts!

Not all free float tubes are rifle length...e.g. URX-II, MRP, etc.

[TacoDelRio]

From non-internet, personal making-big-holes-in-distant-objects experience, you can load a longer round into an M79 than an M203. That also means some of the less-lethal rounds.

It may very well have to do with the pressures and stuff as well, but that's a bit too scientific for me. I just point it at stuff and squeeze the trigger, and boomies happen.

I don't think US Forces use +P+ loads in ther 203's. ;)

[LeMonjello]

From non-internet, personal making-big-holes-in-distant-objects experience, you can load a longer round into an M79 than an M203. That also means some of the less-lethal rounds.

It may very well have to do with the pressures and stuff as well, but that's a bit too scientific for me. I just point it at stuff and squeeze the trigger, and boomies happen.

I don't think US Forces use +P+ loads in ther 203's. ;)

The idea was to land an explosive round near an IED to detotante it before it can hurt anyone. Ofcourse, you don't want the 40mm round to land off its intended target. The M203 could not do this, therefore the M79 with it's higher accuracy and longer range was re-introduced to Marines and Army. More hersey - the M79 was NEVER "decomissioned" from SOF. I wonder if this is true.

Maybe a marketing ploy by CAW to get all the wannabe's to buy the M79? :)

[Kilo1-1]

LeMonjello,
Thanks for the link...but it doesn't quite prove that such a receiver actually exists in reality? Do you have a specific picture from the trials show? Because from reading that thread, it seems the dispute has not quite ended because the lack of solid evidence.

Also, those who want an authentic Marine Corps loadout should probably go with a Colt or FN receiver, as that is what is being issued.

[LeMonjello]

LeMonjello,
Thanks for the link...but it doesn't quite prove that such a receiver actually exists in reality? Do you have a specific picture from the trials show? Because from reading that thread, it seems the dispute has not quite ended because the lack of solid evidence.

Also, those who want an authentic Marine Corps loadout should probably go with a Colt or FN receiver, as that is what is being issued.

On page 4 of the thread you see Olka's pictures of the USMC00001. That is the real rifle presented at Shot Show a few years ago. Several folks on this board (including myself :) ) have seen it.

[Kilo1-1]

Oh...ok. I thought that picture was just another airsoft rifle, but upon closer inspection it seems to be the real deal. Thanks for the information. I guess that receiver must be one of those "one of a kind" thing, much how like there are supposedly only 6 Knight's SR-47s in existence.

[TacoDelRio]

I still don't think the M16's in use by the USMC have the EGA on the reciever..... seeing as alot of their soldiers in non-0300 positions carry older M16A2's.

LeMonjello: Is it Lemon Jello or a French name? :) I've never tried to hit an IED sized object with a 40mm grenade, just window sized openings and such. Damn those chalk rounds are fun.

[LeMonjello]

I still don't think the M16's in use by the USMC have the EGA on the reciever..... seeing as alot of their soldiers in non-0300 positions carry older M16A2's.

LeMonjello: Is it Lemon Jello or a French name? :) I've never tried to hit an IED sized object with a 40mm grenade, just window sized openings and such. Damn those chalk rounds are fun.

The Marine Environment rifle never hit production. It was a prototype that was assemebled in very few numbers (much like the SR47) all the parts were treated to resist the corrosive effects of salt water.

FYI: Ok, so here's what I was able to dig up on the M79 in Iraq. The M203's major flaw was the lack of accuracy. As you said, it's apparently difficult, if not impossible, to hit an IED sized device with a 40mm gernade. EOD apparently discovered that if you take a round chambered for the Mk19 which uses higher pressure, fired from an M79, it was very possible to detotante a 40mm HEDP "in the proximity of" an IED to "disable" it - I guess they mean, blow it up. Apparently, the pressures and the "propellant" from the Mk19 HEDP round was incompatable with the M203. As a result, suprlus M79's are now being issued as an effective means to disable IED's. Who knows...

Another reason the M203 were being ditched by EOD was that their Mk18 Mod0's used 10.3" barrels...too short for the M203. I suppose the military has not issued the LM&T M203's which should mount on the 10.3" uppers.

Whatever...basically, that sound you hear is all the wannabe's buying up M79's! :)

[TacoDelRio]

I'm suprised they don't have a rail system for an M79 out there yet.

[Confed_up]

Whats a Classic Army?:roll:

[ShakesFIST]

I'm suprised they don't have a rail system for an M79 out there yet.

They need one! I want to mount a Surefire, an ACOG, and a 203 on it!

[Anthony91]

Whats a Classic Army?:roll:

Classic Army is a AEG Maker out of Hong Kong.

[TacoDelRio]

They need one! I want to mount a Surefire, an ACOG, and a 203 on it!


HAHAHAHAHAHAAHAHA an M203 on an M79.

I'd like at least 4 vert grips on it.

[RandallH1989]

http://img.photobucket.com/albums/v330/randallh1989/m4new.jpg

Prime Crane Stock
Hurricane Metal body
CA RIS / outer barrel
Hakko Tacpoint
Various internals.. All upgraded.. Fires about 380 FPS with .2's.

[Kilo1-1]

Nice carbine!

[Milla]

USP Compact with Shooters design slide and barrel, high flow valve installed, and enhanced recoil spring.

All with my Jack Bauer tactical shoulder bag and Blackhawk CQC Holster.

Hope you enjoy :P

http://img255.imageshack.us/img255/999/uspcmpct4ou.jpg

http://img255.imageshack.us/img255/5348/uspcmpct25ck.jpg

http://img255.imageshack.us/img255/7537/uspcmpct33lm.jpg

http://img255.imageshack.us/img255/7298/uspcmpct46tt.jpg

http://img255.imageshack.us/img255/6350/uspcmpct50ji.jpg

http://img255.imageshack.us/img255/774/uspcmpct62ma.jpg

[Kilo1-1]

Hey Milla, I remember someone commenting about your satchel in every picture, but I can't remember what it exactly was. Is there a symbolic value to it?

[Milla]

Jack Bauer uses the same satchel, thats why i paired it with a USP Compact which is what he uses (plus i love the USP compact, i plan on getting a real on this summer.)

[Kilo1-1]

Jack Bauer, hm.. I don't know anything about this guy, except somethign that he's in 24 or something?

[Milla]

Indeed, 24 is a show that i love.

[TacoDelRio]

I gotta put together my Spiderman loadout then.

[RandallH1989]

Decided to put my carry handle back on to co-witness it with the red dot, otherwise it's hard to line my shot up since the dot is at a differnet point every time i bring my cheek to the stock.

http://img.photobucket.com/albums/v330/randallh1989/m4supanew001.jpg

[bigjeff]

Decided to put my carry handle back on to co-witness it with the red dot, otherwise it's hard to line my shot up since the dot is at a differnet point every time i bring my cheek to the stock.

http://img.photobucket.com/albums/v330/randallh1989/m4supanew001.jpg

Well i think it always looks better with the removal of the carrying handle but practical is everythin!

[RandallH1989]

I like the way it looks with the carry handle on there better. And yeah, practicality first.

[THE JACKAL]

Wait.. How come your red dot keeps moving to different points every time you bring it up to aim?

[Death.]

Wait.. How come your red dot keeps moving to different points every time you bring it up to aim?

It depends on which angle you're looking through it, newb!1!1!11!!

Red dots are funky like that, you gotta be careful... I line it with the front site.

[THE JACKAL]

I am still saving for my aimpoint replica.. I have been useing Iron sights soo.. yea.. I wouldn't know..

Have you ever thought of this Randall?

http://media.militaryphotos.net/photos/albums/M4-Carbine/m4_cutdown02.thumb.jpg

[Milla]

I had that, but i got tired of looking through the rear sight, so i got a flip up AMRS replica and i keep it down when the red dot is on because it is not needed.

[RandallH1989]

I know what a chopped carry handle looks like. I like this just fine. It really doesn't matter to me if the handle is chopped. In fact, I like it the way it is. It is neccessary to co-witness the sights since every time you put your cheek back on the stock, the dot is in a different position. A flip up would work too.

[THE JACKAL]

Sorry dude..

I was just suggesting it...

[RandallH1989]

..? I was just explaining why I had it like that.

[tenda]

USP Compact with Shooters design slide and barrel, high flow valve installed, and enhanced recoil spring.

All with my Jack Bauer tactical shoulder bag and Blackhawk CQC Holster.

Hope you enjoy :P

http://img255.imageshack.us/img255/999/uspcmpct4ou.jpg

http://img255.imageshack.us/img255/774/uspcmpct62ma.jpg
sweet baby milla p-)

[modd3r]

Wonderfull! KJ?

[TacoDelRio]

The dot is in a different spot each time because cheap sights like that are not parallax free. Say you were shooting an M16 with an actual Aimpoint on it, wherever that dot is, is where the round will go.

For a better explanation, www.google.com

[RandallH1989]

Its a Hakko Tacpoint, an aimpoint knockoff made for real steel.

[TacoDelRio]

Omfg Rull St33l!!11

[MatteoTSU77]

The dot is in a different spot each time because cheap sights like that are not parallax free. Say you were shooting an M16 with an actual Aimpoint on it, wherever that dot is, is where the round will go.

For a better explanation, www.google.com (http://www.google.com)


i've tried with...but i've found the model with 2 rings.....any other link?
:hug:

[TacoDelRio]

i've tried with...but i've found the model with 2 rings.....any other link?
:hug:

I'm not sure what you mean but if you're looking for parallax free sights, pretty much all the service sights are so. Some like the Aimpoint are parallax free at 200m or some junk, but I never had problems with it.

Of course, iron sights are always parallax free HINT HINT HINT p-)

[Gunfreak]

three generations of WA 1911's

http://home.chello.no/~gunfreak/airsoft/gen.jpg

[Kilo1-1]

Three generations of effective lethality.

[Gunfreak]

the first pistol was the best. all others are just wannabies

[RandallH1989]

Guys - I highly advise against crane stocks. Mine has had nothing but trouble since I have set it all up. Wires snag and even created a spark at one point. Very dangerous. Be careful when using these..

[Kap]

Guys - I highly advise against crane stocks. Mine has had nothing but trouble since I have set it all up. Wires snag and even created a spark at one point. Very dangerous. Be careful when using these..


Reminds me of my G36C, especially the bottom rail gives me ****, I had to replace the 2 screws to shorter ones because I couldn't get the battery into the handguard because the screw kept stopping it and I'd just shove it the **** in. Last time I did that, I walked through half the woods, touched my rifle, and burnt myself. I ripped the handguard off and threw the battery into the deepest area of the woods. It shorted!!!! And melted some of the plastic in the handguard, but otherwise didn't suffer too much damage, I was grateful!

[Spartan XV]

Guys - I highly advise against crane stocks. Mine has had nothing but trouble since I have set it all up. Wires snag and even created a spark at one point. Very dangerous. Be careful when using these..

Incorrect installation, not ment as a personal attack, but thats what it is. I had a crane stock and I loved it, you really have to take your time with it, I also used alot of heatsink (sp?) tubing and covered the enitre wire section.

[tenda]

three generations of WA 1911's

http://home.chello.no/~gunfreak/airsoft/gen.jpg
3 sweet babies...>!!!!!!!!!!!!:)

[Blarney]

http://img331.imageshack.us/img331/7885/birthdaygear0020sa.jpg
http://img284.imageshack.us/img284/6120/birthdaygear0010nu.jpg
http://img284.imageshack.us/img284/5664/birthdaygear0039it.jpg

Its a cheapo...but its good looking and its being used in the school play entitled SandStorm. I gotta take care of the orange too...nothing a little scraping and repaint wont fix.

[Spartan XV]

Its a cheapo...but its good looking and its being used in the school play entitled SandStorm. I gotta take care of the orange too...nothing a little scraping and repaint wont fix.

Try nail polish remover, it worked for mine.

[Blarney]

its not paint....but the gun is drying right now.

[Scaar.at]

RPK-74N now featuring 45 round mag converted to airsoft and PBS1-Supressor:

http://www.scaar.at/airsoft/rpk451.jpg

http://www.scaar.at/airsoft/rpk45pbs12.jpg

More pics: http://www.scaar.at/airsoft/rpk.htm

[Lone]

RPK-74N now featuring 45 round mag converted to airsoft and PBS1-Supressor:

http://www.scaar.at/airsoft/rpk451.jpg

http://www.scaar.at/airsoft/rpk45pbs12.jpg

More pics: http://www.scaar.at/airsoft/rpk.htm


VERY NICE!
i love it!

[TacoDelRio]

SCAAR: What makes it an "N", in RPK-74N? Naval version?

You could have your own airsoft Russian army.

[Anthony91]

RPK-74N now featuring 45 round mag converted to airsoft and PBS1-Supressor:

http://www.scaar.at/airsoft/rpk451.jpg

http://www.scaar.at/airsoft/rpk45pbs12.jpg

More pics: http://www.scaar.at/airsoft/rpk.htm

Lemme guess. 50+ lbs?

Pretty darn awesome though.

[Kap]

RPK-74N now featuring 45 round mag converted to airsoft and PBS1-Supressor:

http://www.scaar.at/airsoft/rpk451.jpg

http://www.scaar.at/airsoft/rpk45pbs12.jpg

More pics: http://www.scaar.at/airsoft/rpk.htm

Sexiest RPK I've ever seen!

[bigjeff]

RPK-74N now featuring 45 round mag converted to airsoft and PBS1-Supressor:

http://www.scaar.at/airsoft/rpk451.jpg

http://www.scaar.at/airsoft/rpk45pbs12.jpg

More pics: http://www.scaar.at/airsoft/rpk.htm



OMG,how much u pay for it!!!
XXXX,it's hot!!!

[Xamor]

http://s47.photobucket.com/albums/f153/Xamor/M14/?action=view&current=DSCN0355.jpg

Desert m14

[TacoDelRio]

Hye that's a pretty pimpin' M14 there dude. We sell the G&G and the TM, and I've been wondering which is the better rifle overall. Looks like you've got a TM? I don't like the stock on those, know of aftermarket ones that don't feel like a toy?

[Xamor]

Yea I have TM and it's been working fine. G&G M14 has all kinds of little problems and it's more expensive than TM.

[TacoDelRio]

G&G's have some nice exterior components and such, but TM is bulletproof insofar as the internals go. Their worky-bits just keep workin'!

[RandallH1989]

Incorrect installation, not ment as a personal attack, but thats what it is. I had a crane stock and I loved it, you really have to take your time with it, I also used alot of heatsink (sp?) tubing and covered the enitre wire section.

I wrote that one night after being pissed off at the battery. I broke one of the wires, but it's fixed now and shouldn't give me any problems.

[Bandit]

Scaar, that RPK is the finest piece of airsoft weaponry I have ever laid eyes on.

[tenda]

OMG,how much u pay for it!!!
XXXX,it's hot!!!
x2 sooooooooooooooooo cool...p-)

[tenda]

well finally i've bought this from firefly...;)
http://img344.imageshack.us/img344/9503/immagine0312yv.jpg

[reggad]

Looks cool tenda, me want one, but no money

[tenda]

Looks cool tenda, me want one, but no money
well man i've sold my soul for buy it....;)

[reggad]

heres what I spent my money on. A jac m16a2 dx full metal.
http://img254.imageshack.us/img254/5373/may064089ot.th.jpg (http://img254.imageshack.us/my.php?image=may064089ot.jpg)

more pics latter sorry for bad quality my camera sucks.

[Spartan XV]

My gun at todays game.

http://img.photobucket.com/albums/v639/Spartan15/Guns/Airsoft040.jpg

[TacoDelRio]

Very nice, simple M4 carbine. I like it, looks great!

I was reffing a game yesterday where one of my customers shot his opponent (a 13 year old kid with a springer) at close range (about 6 feet) with his CA M203. Sure scared the sh*t out of that kid!

[Death.]

Very nice, simple M4 carbine. I like it, looks great!

I was reffing a game yesterday where one of my customers shot his opponent (a 13 year old kid with a springer) at close range (about 6 feet) with his CA M203. Sure scared the sh*t out of that kid!

Pwned!
Try to get some pics of those games!

Nice m4 Spartan, similar to my project but fake aimpoint and a short m203 instead........now I gotta just find my platinum card....

How big of a battery do the crane stocks hold?

[Milla]

My gun at todays game.

http://img.photobucket.com/albums/v639/Spartan15/Guns/Airsoft040.jpg

Is that the QD 203?

[Spartan XV]

The crane stock on my gun (G&P RAS II) is smaller (like the real Crane stock) that the CA crane stock, so it doesnt hold huge batteries like they can, but I like the feel of the stock better, doesnt get in my way. Right now I have 2 8.4v 1700mah batteries, with some 9.6vs on the way.

Im also getting an ACOG, an QD silencer, Im going to cut the barrel of the 203 down, and give it a paintjob (the trademarks are messed up pretty bad)

EDIT

No Milla it isnt, but Im trying to find the QD thingy for less than an arm and a leg.

[TacoDelRio]

Im also getting an ACOG, an QD silencer, Im going to cut the barrel of the 203 down, and give it a paintjob (the trademarks are messed up pretty bad)

You mean the trademarks on the M203? I've seen some pretty sh*tty machine work and overall fit and finish on gas M203's. The track that the tube rides in still has scrolling marks from machining, the finish on the trigger group housing looks like it needs a few passes with sandpaper, the breechfaces all look pitted and like poorly constructed cast metal. I'm sorry they all kinda suck. :roll:

That, and I've yet to find an airsoft M203 safety that's as friendly to operate as an actual M203 safety. They always make the safety trigger too damn close to the trigger guard.

Maybe someone makes better ones that are actually worth what you hafta shell out for one of these things?

[Spartan XV]

No, the trades on my M4 got covered with a peice of plastic that was glued to the body.

But my G&P M203 is prettyg good, I guess, Ive never handled a real one so I dunno.

[Catch22]

SCAAR: What makes it an "N", in RPK-74N? Naval version?

You could have your own airsoft Russian army.

N is for "nightvision", basically it suggests that weapon has side rail for night Scope and in some versions also tritium sights.

To each it's own ;-)

http://img208.imageshack.us/img208/1217/hpim62634th.th.jpg (http://img208.imageshack.us/my.php?image=hpim62634th.jpg)

[Death.]

Looks like a telescope to me! lol

[tenda]

Very nice, simple M4 carbine. I like it, looks great!

I was reffing a game yesterday where one of my customers shot his opponent (a 13 year old kid with a springer) at close range (about 6 feet) with his CA M203. Sure scared the sh*t out of that kid!
x2 very nice.....:)

[ShakesFIST]

My newest addition:
http://img279.imageshack.us/img279/1883/g36k6rj.jpg (http://imageshack.us)

My new Classic Army G36K with the following:
-Harris Bipod/foregrip
-Star Dual optics/carrying handle
-Specter G36 sling
-PEQ-2 Box with 10.8v 3300 battery
-Upgraded to 400 fps

After some issues I finaly got this thing working fully so I decided to finally post.

[Death.]

My newest addition:
http://img279.imageshack.us/img279/1883/g36k6rj.jpg (http://imageshack.us)

My new Classic Army G36K with the following:
-Harris Bipod/foregrip
-Star Dual optics/carrying handle
-Specter G36 sling
-PEQ-2 Box with 10.8v 3300 battery
-Upgraded to 400 fps

After some issues I finaly got this thing working fully so I decided to finally post.

Bipod on a K? Interesting

[ShakesFIST]

^ I love it on there. I had a Knights foregrip on it before and I like the Harris MUCH better as it is also a bipod (what its designed to be :) ). Its on a quick detach if I get annoyed with it anyways.

[Death.]

So you use it as a bipod and vert grip? lol

[ShakesFIST]

So you use it as a bipod and vert grip? lol

Yep, odd I know but it works nicely. Its a compact LMG anyways. 400 FPS and a 10.8 battery. Powerful and fast shooting.

[MatteoTSU77]

well man i've sold my soul for buy it....;)


UAZ UAZ UAZ!!!!

[PILMAN]

Here

Tokyo Marui Desert Eagle Hardkick (Gas blow back)
http://www.fwbairsoft.com/mine/deagle.jpg

FTC Galil (Classic)
http://www.fwbairsoft.com/mine/galil.jpg

Maruzen TEC-9 (Classic)
http://www.fwbairsoft.com/mine/kg9.jpg

MMC L85A1 With Asahi Internals (Classic)
http://www.fwbairsoft.com/mine/l85.jpg

G&P M4A1 w/ G&P Aimpoint reddot scope (AEG)
http://www.fwbairsoft.com/mine/m4.jpg

KSC USP Full Size (Gas Blow Back)
http://www.fwbairsoft.com/mine/usp1.jpg
http://www.fwbairsoft.com/mine/usp2.jpg

[bigjeff]

Here

FTC Galil (Classic)
http://www.fwbairsoft.com/mine/galil.jpg



MMC L85A1 With Asahi Internals (Classic)
http://www.fwbairsoft.com/mine/l85.jpg




You collection is awesome!!!!ESP these two,can't find them anymore

[Kilo1-1]

PILMAN, that is a huge monitor. Nice collection of the classics, especially that Galil.

[PILMAN]

PILMAN, that is a huge monitor. Nice collection of the classics, especially that Galil.

Thanks, I haven't shot the galil yet but that L85 is a great choice for skirmishes, it's definitely useable. The original MMC models I guess had really nice bodys but not so nice internals, and it was hard to find magazines. Some guy in Japan sold me it with the Asahi internals so I can use the Asahi m16 magazines, quite amazing how accurate and fast it is as well with some good velocity. With the galil i'm doing a Israel Defense Force loadout, although the IDF doesn't really use GALIL ARM anymore (except for training) it'll still be a nice touch for a photo :) . As for the monitor it's a 19" samsung 190s, I think I bought it at sams club at the time in 2003, you can get them relatively cheap on ebay I believe though sams club seems to stock a lot of electronics you can't really find any information on. Only thing left for my IDF collection is a Jericho but the only maker of it is Hudson and I've heard not so good things regarding the Hudson version :-/

[Kap]

I just bought myself an L85 too today with a generic aimpoint for my g36c, and some molle pouches for my drop leg! I will have pictures tomorrow.

[TacoDelRio]

PILMAN

Holy crAPAPPPP1!!!!!!

How much did you pay for that TEC-9?! That's HILARIOUS! Damn I'd love one just as a pure joke!

I assume it's better than an actual TEC-9. No, I KNOW it's better made!

[Seiran]

For some reason, when I looked at the Tec9, the song "California Love" by Tupac and Dr. Dre popped into my head. *shrugs*

[reggad]

Nice collection PILMAN. Love that tec 9.

[PILMAN]

PILMAN

Holy crAPAPPPP1!!!!!!

How much did you pay for that TEC-9?! That's HILARIOUS! Damn I'd love one just as a pure joke!

I assume it's better than an actual TEC-9. No, I KNOW it's better made!

Funny you mention that because your correct, it's made much better than the real TEC9. I used it for a columbine reenactment at school a while back. The TEC9 I overpaid for on endoshoji, I think I paid 300, you can probably get one for 200ish on classiairsoft.net. If you want the stock and supressor it'll probably cost a bit more. They also make a gas blow back of the TEC9 but the magazines are rare and expensive. I recommend the classic version. Don't think i'd pay the cash for a real "jam-o-matic" if you get my drift :)

[tenda]

You collection is awesome!!!!ESP these two,can't find them anymore
x2 i love them too...!!!!!!!!!!!p-)

[TacoDelRio]

Funny you mention that because your correct, it's made much better than the real TEC9. I used it for a columbine reenactment at school a while back. The TEC9 I overpaid for on endoshoji, I think I paid 300, you can probably get one for 200ish on classiairsoft.net. If you want the stock and supressor it'll probably cost a bit more. They also make a gas blow back of the TEC9 but the magazines are rare and expensive. I recommend the classic version. Don't think i'd pay the cash for a real "jam-o-matic" if you get my drift :)

Bad magazines usually cause the jams. Seems to be common.

Pretty sweet dude, nice find!

[Kap]

I'm bored, just wanted to show my lovely 3D rifle camo and new red green aimpoint. Can't wait to use it Saturday!

http://img115.imageshack.us/img115/9449/dsc010875lw.jpg
http://img99.imageshack.us/img99/2388/dsc010895xp.jpg
http://img115.imageshack.us/img115/8003/dsc010906ep.jpg
http://img99.imageshack.us/img99/3890/dsc010921tq.jpg

[MadMan]

The tools of the trade from me and my girl:

http://img137.imageshack.us/img137/49/dscf00635ne.jpg

The CA M249 para, CA M15A4 carbine and the Glock 17 with real M3 are mine.
The G&P M4 CQB and Glock 17 with replica M3 is my girl's.

[Seiran]

Pics of the girl, or she's not real. :P

[1Cie GevGn]

Pics of the girl, or she's not real. :P

Carefull, she's pretty good with restraints

[Seiran]

Carefull, she's pretty good with restraints

Don't tease.

[Kilo1-1]

It's been a little 2 months since I camo'd the M4. I'm finally getting the wear that I want (got it through usage in skirmishes, etc). The paint from the outer-barrel has been removed, as it has been chipping at a fast rate after the first 1.5 months. It may not be as "pretty" as when it first started 2 months ago, but it still works well, and in my opinion, looks somewhat more realistic with the wear.
http://img107.imageshack.us/img107/4324/standardcarbine16uu.jpg

http://img286.imageshack.us/img286/7448/standardcarbine25ls.jpg

http://img286.imageshack.us/img286/7781/sopmod17od.jpg

http://img286.imageshack.us/img286/8558/sopmod28xh.jpg

http://img107.imageshack.us/img107/7466/receiverclose9hl.jpg

http://img286.imageshack.us/img286/7074/sopmodangle6te.jpg

[Spartan XV]

Whats the tape on the mags for?

[Kilo1-1]

Identification purposes (share mags with teammates during a firefight, and it allows me to tape my mags together (upside down) when I need to.

[RandallH1989]

I know there's a reason why putting the tape on the mag is useful when taping the mags together, but I forget why.

[bigjeff]

http://i12.photobucket.com/albums/a235/donotforgetaus/elcan001.jpg
http://i12.photobucket.com/albums/a235/donotforgetaus/elcan002.jpg

http://i12.photobucket.com/albums/a235/donotforgetaus/elcan003.jpg

[TaZ]

http://i12.photobucket.com/albums/a235/donotforgetaus/elcan001.jpg
http://i12.photobucket.com/albums/a235/donotforgetaus/elcan002.jpg

http://i12.photobucket.com/albums/a235/donotforgetaus/elcan003.jpg

Nice ELCAN you got there :), nice set-up also.

[MadMan]

Pics of the girl, or she's not real. :P

Just take a look in the forums with airsoft loadout, she is in there.

And yes she is good with handcuffs... p-)

[bigjeff]

Nice ELCAN you got there :), nice set-up also.


thx mate!p-)

[tenda]

very nice toyz in the lasts post guyx...!!!!!!!!!!:)

[tenda]

imy new lover....:)
http://img108.imageshack.us/img108/3008/immagine0065vg.jpg

[Tyrus]

My US style AKM

Guarder AKM, with Ultimak mount and EO Tech 552

http://i34.photobucket.com/albums/d134/Tyrus_SWE/AKM01.jpg

http://i34.photobucket.com/albums/d134/Tyrus_SWE/AKM02.jpg

[tenda]

damn sexy man.!!!!!!!!!:)

[bigjeff]

My US style AKM

Guarder AKM, with Ultimak mount and EO Tech 552

http://i34.photobucket.com/albums/d134/Tyrus_SWE/AKM01.jpg



Frankly speakin mate,no offence,wooden ak can't go well with eo-tech.
I'd advice u either dump the eo-tech or change teh wooden stock to plastic.p-)

[bigjeff]

imy new lover....:)
http://img108.imageshack.us/img108/3008/immagine0065vg.jpg


no battery pouch pls my fd:bash:

Anywayz,personal prefernce onli,nice gun wat so ever!!

[Seiran]

Nice suppressor you have there Tenda.

[tenda]

Nice suppressor you have there Tenda.
...tnxs...firefly give it to me....for how still not much:)

[assasi82]

Hi people:

This are my two babys...

M4 SOCOM Full equip:

http://fotos.miarroba.com/fotos/d/3/d3d439d3.jpg

http://fotos.miarroba.com/fotos/6/1/615adda9.jpg

COLT PARA 14.45:

http://fotos.miarroba.com/fotos/4/3/43d3ddde.jpg

One greeting from Spain...

[MadMan]

Tenda, clean your PM box! p-)

[Death.]

Hi people:

This are my two babys...

M4 SOCOM Full equip:

http://fotos.miarroba.com/fotos/d/3/d3d439d3.jpg

http://fotos.miarroba.com/fotos/6/1/615adda9.jpg

COLT PARA 14.45:

http://fotos.miarroba.com/fotos/4/3/43d3ddde.jpg

One greeting from Spain...

Holy hell, you have one of those ancient, crappy CA M4's.. get a new one man! then you get trades,haha

[assasi82]

HAHAHAHAHA... I know I know... but she still firing like the first day...

[tenda]

Tenda, clean your PM box! p-)
ok...nice lady assasi 82

[assasi82]

Thanks Tenda...

How are you... there a lot of time that I dont connect by here... the work is to much absorvent... :):)

One greeting man...

[tenda]

Thanks Tenda...

How are you... there a lot of time that I dont connect by here... the work is to much absorvent... :):)

One greeting man...
..pues...i'm doing ok.....in espagna que pasa...?
un abrazo p-)
b.t.w. my toyz re-painted with pistol and aksu too...;)
http://img452.imageshack.us/img452/5675/immagine0079ce.jpg

[reggad]

Coooooooooooooool guns tenda

[Death.]

Tenda, we're still waiting on a picture of your entire airsoft warehouse :D

[tenda]

Tenda, we're still waiting on a picture of your entire airsoft warehouse :D
tnxs guyz...but i will need an entire week end for do it...!!!!!!!:)

[TacoDelRio]

Tenda,

I want that AKSU74 damnit.

The end.

[tenda]

Tenda,

I want that AKSU74 damnit.

The end.
come here and i let you play with it...:)

[TacoDelRio]

That's disgusting, Tenda!

I'm still tempted. Did I add that I'm NOT from West Hollywood?

[tenda]

That's disgusting, Tenda!

I'm still tempted. Did I add that I'm NOT from West Hollywood?
don't worry i'm an old style man...i was talking about the ak...!!!!!!!!:)

[TacoDelRio]

Sure you were....


....gettin' a little lonely in Italy eh? ;)

[tenda]

Sure you were....


....gettin' a little lonely in Italy eh? ;)
..sureeeeeeeeeeeeeeeeee:)

[Mongoose_nl]

Bought this baby today. :)
I will put RIS and scope on as soon as I have converted it to SEMI.

http://www.xs4all.nl/~timmersg/photos/M14.jpg

[Hawkeye]

Why are you gonna make it semi-only?

[Digital Marine]

Sniper purposes?

[Hawkeye]

Sniper purposes?


Yeah, possibly, but what FPS is legal for semi-auto weapons Mongoose? Isn't that still like 350?

[Mongoose_nl]

Yeah, possibly, but what FPS is legal for semi-auto weapons Mongoose? Isn't that still like 350?


Yep...sniper purpose. When it is SEMI it is allowed up to 500 fps.
But I will be happy when I can squeeze 420 out of it.

My team mate just did his M14 and it is shooting somewhere between 400 and 420. Perfect!

[tedtay17]

everywhere i play semi only is like 550

[tenda]

Bought this baby today. :)
I will put RIS and scope on as soon as I have converted it to SEMI.

http://www.xs4all.nl/~timmersg/photos/M14.jpg
zooooooooo nize...p-)

[TacoDelRio]

420fps with it hitting a paper plate at 75 meters would be great!

What weight BB's does you buddy use for his?

[Mongoose_nl]

What weight BB's does you buddy use for his?

Mostly Bioval 0.25

[TacoDelRio]

420 with .25's? I'm surprised that works for him. Then again I don't have alot of experience in the airsoft sniper field. I would think more along the lines of .36's.

[Mongoose_nl]

420 with .25's? I'm surprised that works for him. Then again I don't have alot of experience in the airsoft sniper field. I would think more along the lines of .36's.

Let me clearify a couple of things.

#1 When we speak about FPS it always refers to test done with 0.20 BB. Because this is rule that is used for measuring. This automatically means that a 0.25 or 0.36 BB has lower FPS.

#2 Main reason for using 0.25 BB is that in main playing fields use of Bioval BBs is demanded, and therefor 0.25 BB is maximum available. In my Tanaka M40 I also used 0.36, but due to limitation as mentioned above changed to 0.25 as well.

[Mongoose_nl]

420 with .25's? I'm surprised that works for him. Then again I don't have alot of experience in the airsoft sniper field. I would think more along the lines of .36's.

Let me clearify a couple of things.

#1 When we speak about FPS it always refers to test done with 0.20 BB. Because this is rule that is used for measuring. This automatically means that a 0.25 or 0.36 BB has lower FPS.

#2 Main reason for using 0.25 BB is that in main playing fields use of Bioval BBs is demanded, and therefor 0.25 BB is maximum available. In my Tanaka M40 I also used 0.36, but due to limitation as mentioned above changed to 0.25 as well.

[Kartoon]

Let me clearify a couple of things.

#1 When we speak about FPS it always refers to test done with 0.20 BB. Because this is rule that is used for measuring. This automatically means that a 0.25 or 0.36 BB has lower FPS.

#2 Main reason for using 0.25 BB is that in main playing fields use of Bioval BBs is demanded, and therefor 0.25 BB is maximum available. In my Tanaka M40 I also used 0.36, but due to limitation as mentioned above changed to 0.25 as well.

Exactly. My vsr shoots 145 m/s with 0,2 g's, but because of the use of 0,36's, it's something around 110m/s. This doesnt decrease the maximum distance of the bb at all, but increases the accuracy by far. Now I'm also able to shoot trough some shrubs and bushes, branches will break, but the bb wont continue on it's way, at least not to the right direction.

[j3T.be]

Sold my m15cqb recently but kinda felt lonely without an m4 so I bought a g&p m4 rasII ^^
Still under contruction ;)

http://users.pandora.be/j3T/Airsoft/DSC01273c.jpg

[tenda]

Sold my m15cqb recently but kinda felt lonely without an m4 so I bought a g&p m4 rasII ^^
Still under contruction ;)


mmhhhhhhhhh...nize :)

[Death.]

Sold my m15cqb recently but kinda felt lonely without an m4 so I bought a g&p m4 rasII ^^
Still under contruction ;)

That is a very interesting vert grip there...it's a bipod as well? lol

[j3T.be]

Yep, it's a proud grippod. Thought it would be quite loose, but it's very sturdy.
If you want one, be fast because the inventors of the real steel grippod aren't too happy with this knockoff :p

[TacoDelRio]

In other words, you guys gotta chrono with .2's at your fields and for test stuff?

[Mongoose_nl]

In other words, you guys gotta chrono with .2's at your fields and for test stuff?

That is easiest and most common way. In that case organisation provides a clip with 0.2 BBs for testing to give at a more offical glamour. :-)

It is also easy to use 0.25 and recalculate energy.

[bigjeff]

Sold my m15cqb recently but kinda felt lonely without an m4 so I bought a g&p m4 rasII ^^
Still under contruction ;)

http://users.pandora.be/j3T/Airsoft/DSC01273c.jpg

i always feel tat grippod should go with the sniper rifle:roll:

[j3T.be]

i always feel tat grippod should go with the sniper rifle:roll:

Weird statement, haven't seen any grippods on snipers yet, only on ar's.
And btw, tell that to the engineers of the fn scar :p

[Kilo1-1]

Stripped all the camo paint off and gave it a fresh black finish. Some parts were also reblued. I'm keeping it black until I think of a pattern to camo in.
http://img65.imageshack.us/img65/723/sopmodblackfull4sk.jpg

[callous]

http://img73.imageshack.us/img73/1843/carl51426gw.jpg

[Wilco]

Didn't try to make it look pretty.

http://img451.imageshack.us/img451/2928/img10995rf.jpg

And I still need the PEQ2 stickers on it.

Oh, and yeah, it works now.

[PILMAN]

I got a new picture of my FTC galil

http://img210.imageshack.us/img210/3025/galilairsoft1vk.jpg

[Seiran]

Didn't try to make it look pretty.

http://img451.imageshack.us/img451/2928/img10995rf.jpg

And I still need the PEQ2 stickers on it.

Oh, and yeah, it works now.

Oh yes...very nice indeed.

[Kilo1-1]

Finished refinishing my M4 Masterkey (day 2), and it's taking a while to do so. Full metal (except for the 870). The Horror.....
http://img316.imageshack.us/img316/4927/masterkeyfull13td.jpg

http://img130.imageshack.us/img130/6014/masterkeyfull24ij.jpg

http://img130.imageshack.us/img130/2482/masterkeyreceiverclose2kq.jpg

http://img167.imageshack.us/img167/2686/masterkeyreceiverclose28ia.jpg

[D.Sigurdsson]

If I were you I'd remove the 870 from the weapon, add a pistol grip on it and have it slinged over your back as a backup.

Doesn't it fµck up the balance?

[Maveric]

http://maveric.geezas.com/M4_Mavs_s.jpg

[TacoDelRio]

KILO: Who the heck makes the recievers on your M4 carbine? I don't see any arsenal markings.... (trademarks, there I said it...:) )

Looks good. Have a good one dude, stay safe.

EDIT: HK diopter sights?!?!!? Neato, how do you like 'em?! I just noticed them!

[bigjeff]

Weird statement, haven't seen any grippods on snipers yet, only on ar's.
And btw, tell that to the engineers of the fn scar :p

well sorri for misleadin u.The sniper rifle i mean is the type like sr25 and such.

[D.Sigurdsson]

Damn Kilo, didn't notice the HK rear sight :D looks sweet
now you just need a HK front sight and you got yourself a HK416
http://files.bns-code.org/hk416.JPG

[tenda]

I got a new picture of my FTC galil

http://img210.imageshack.us/img210/3025/galilairsoft1vk.jpg
meeeeeeeeeeeeeeee like...!!!!!!!!!!!!!p-)
after a ton of us rifle i need a galil...!!!

[bigjeff]

meeeeeeeeeeeeeeee like...!!!!!!!!!!!!!p-)
after a ton of us rifle i need a galil...!!!
This rifle is my dream gun as wel...mouth-watering

[Kilo1-1]

Thanks for the comments all!
D.Sigurdsson, you're right. I don't normally use the masterkey at all (as situation never calls for it.) Balance wise, it's not too bad to handle, as the masterkey itself acts like another foregrip.
MrSkorotsnoy, the receiver is just an el cheapo SRC metal receiver with engraved SRC trades I sprayed flat black. In person, the trades are still barely visible if you look very closely. As for the BUIS, I've had it for a while, and it's also in my previous pictures. I custom made the diopter rear sites from my old UHC MP5 by sticking them onto a weaver scope ring. It's very very solid. It works very well because I am able to adjust the site of the peep hole.

[MadMan]

My KSC Glock 17 (metal slide) with Streamlight M3.

http://img427.imageshack.us/img427/6139/dscf00640bz.jpg

[Anthony91]

That's an awesome Glock MadMan !!!!:D:D

[MadMan]

Thanks man! ;-)

[Kilo1-1]

I finished the finish on the RIS rail covers and the 'can' (complete with sound insulating foam) today. I used a dark gray primer for the color, and buffed it until it had a satin finish to it (as a opposed to an ultra flat look) for a real steel look.
http://img119.imageshack.us/img119/1567/m4sdfull7ax.jpg
http://img152.imageshack.us/img152/1533/suppressor8sm.jpg
It's actually not so glossy in person, the camera made it appear so.
This is the receiver up close once again, with the carry handle this time.
http://img152.imageshack.us/img152/2896/receivercarryhandleclose1de.jpg

[TacoDelRio]

Kilo,

Good deal dude. Looks great, you did a great job!

[Death.]

I KNOW you didn't just say 'real steel', kilo

[Kilo1-1]

Thanks MrSkorotsnoy.
D3ath, OH NO! I did, didn't I?

[Death.]

Thanks MrSkorotsnoy.
D3ath, OH NO! I did, didn't I?

Yes, I think you did -
(as a opposed to an ultra flat look) for a real steel look.

Sorry, but now you have to........die..

:D

[Crewdog]

Nice looking gun there Kilo

[Anthony91]

Yes, I think you did -

Sorry, but now you have to........die..

:D

Don't we cal Real Steel now... Real {some other material}? Why can't we just call it Real Stuff/Sh*t/Crap?

[Kilo1-1]

Thanks for the comment Crewdog.
Ha ha, didn't know many people here in the forums were sensative about the phrase "Real Steel." I know many of the actual parts (of the real thing) aren't made of steel, but I liked the phrase because it rhymed. Now I know not to use it here, as people are as sensative to it as the "Clip" vs "Magazine" issue.

[Death.]

Well, specifically for the M16's and M4's the term real steel isn't accurate, the majory if steel on the M16 is only in the front site and barrel, the rest being little pieces like the trigger and magazine release..

Real aluminum is where it's at.

[Spartan XV]

Well, specifically for the M16's and M4's the term real steel isn't accurate, the majory if steel on the M16 is only in the front site and barrel, the rest being little pieces like the trigger and magazine release..

Real aluminum is where it's at.

Yea, like he said, real steel it is.

[D.Sigurdsson]

you guys have a fit over the term "real steel" but feel it's ok to wear every US Army patch/badge available? *shakehead*

[Anthony91]

you guys have a fit over the term "real steel" but feel it's ok to wear every US Army patch/badge available? *shakehead*

LOL, that is true.

[Death.]

LOL, that is true.

I don't wear badges, you bastid.
Just the american flag.. but I am Americun so that ain't posin. lol

[Anthony91]

I don't wear badges, you bastid.
Just the american flag.. but I am Americun so that ain't posin. lol

Did I post anything towards you. I just agreed with Sigurdsson. And I wear the American flag too. And theres nothing wrong with that.

[Wilco]

My sexy thangs'.

http://img117.imageshack.us/img117/7499/img11074re.jpg
http://img68.imageshack.us/img68/6076/img11101ra.jpg
http://img68.imageshack.us/img68/9826/img11119hh.jpg

[Death.]

Did I post anything towards you. I just agreed with Sigurdsson. And I wear the American flag too. And theres nothing wrong with that.

Oops, I meant to quote Sigurdisson, not you..smartass :D

Wilco, I thought you were diong a vietnam thing? don't think they used USP's :)

[Wilco]

Oops, I meant to quote Sigurdisson, not you..smartass :D

Wilco, I thought you were diong a vietnam thing? don't think they used USP's :)


What the hell are you talking about?

[Milla]

Nice M14 Wilco, i want one lol

[Hurricane]

http://i23.photobucket.com/albums/b363/Harmklinga/understod1.jpg

http://i23.photobucket.com/albums/b363/Harmklinga/understod3.jpg

[TacoDelRio]

Hurricane: Do you feel your Gripod is an improvement over the M249 bipod?

[Kilo1-1]

Awesome camo job on that 249 para Hurricane.

[Firefly26]

Hurricane: Do you feel your Gripod is an improvement over the M249 bipod?

http://onfinite.com/libraries/833614/ebc.jpg

I did the same thing to my 60. It's just a thing I'd do in airsoft, as you don't do much firing in the ****e in a fighting position and move alot. Most of the time I'd be running with it using it like a rifle, the old bipod is kind of a hindrance in that case, yet a pistol grip that instantly pops out the bipod, that is much more useful. I am kind of leery about putting too much downward force on the legs though. They don't look like they can take much.

[TacoDelRio]

It's all polymer, correct?

I'm not too big on bipods personally, but one of these on a DMR such as an M14/M21 might be handy.

[Death.]

What the hell are you talking about?

Nvm,lol..that was USMC3000 or w/e..

[MatteoTSU77]

http://onfinite.com/libraries/833614/ebc.jpg

I did the same thing to my 60. It's just a thing I'd do in airsoft, as you don't do much firing in the ****e in a fighting position and move alot. Most of the time I'd be running with it using it like a rifle, the old bipod is kind of a hindrance in that case, yet a pistol grip that instantly pops out the bipod, that is much more useful. I am kind of leery about putting too much downward force on the legs though. They don't look like they can take much.


woot bro'...that's what i needed!!!!

[Hurricane]

I like vertical foregrips, and enjoy having bipods so the Grippod seemed like a viable option. It does the job.

Thinking about getting a Tango Down Vertical Foregrip and TD Bipod instead though.

[tenda]

Awesome camo job on that 249 para Hurricane.
uhhhhhhhhhhhhhhhh...me like tooo...!!!!!!!!!!!:)

[modd3r]

http://i32.photobucket.com/albums/d29/modd3r/alpenm21.jpg

M21 @ scanning the austrian mountains :)

[Milla]

Exactly whats the diffrence from an M21 and an M14?

[Göönk]

http://world.guns.ru/sniper/sn09-e.htm

[Kilo1-1]

Alright, new updates. I also re-finished the BE 870, and finished the fabrication of my precision tactical suppressor (long type). I have two masterkey systems, the Hardballer 870, and this BE 870. The BE 870 is much lighter, and easier to wield than the Hardballer. The suppressor was painted with dark grey, then polised/buff with a little shine to mimic the real thing.
http://img156.imageshack.us/img156/1659/masterkeysidefull9fe.jpg
http://img156.imageshack.us/img156/702/masterkeysidefull28kj.jpg
http://img156.imageshack.us/img156/4836/longsuppressorfull4nd.jpg
http://img476.imageshack.us/img476/3184/suppressor4lf.jpg

[Seiran]

Man that's a nice looking suppressor.

Some high-class work you do Kilo.

[Kilo1-1]

Thank you for the comment. I only have access to humble material and equipment to go around with.

[TacoDelRio]

Cool stuff guys!

Kilo, if you wanna be supr realistic and all, you wouldn't have 550 cord around a hot barrel for too long before the weapon falls...

[Mongoose_nl]

Photo of me and my brand new M14 than I used for the first time during last Sunday's Skirm in Belgium.
The M14 rocks and is by far the best AEG I bought until now.

http://www.xs4all.nl/~timmersg/photos/M14_01.jpg

[tenda]

Man that's a nice looking suppressor.

Some high-class work you do Kilo.
x2 ..that's a badass rifle...!!!!!!!!!:)

[Kilo1-1]

Thanks Tenda.
MrSkorotsnoy, you do have a good point. I guess I should tie the 550 around the front iron sites instead.

[Sten3]

Photo of me and my brand new M14 than I used for the first time during last Sunday's Skirm in Belgium.
The M14 rocks and is by far the best AEG I bought until now.

http://www.xs4all.nl/~timmersg/photos/M14_01.jpg

nice, nice, which scope are using??

[Mongoose_nl]

nice, nice, which scope are using??

Guarder TriRail Scope

http://www.xs4all.nl/~timmersg/photos/TriRail.jpg

[TuNeRsHaRk]

yep, looks like he attached some kind of laser to the side of it, almost looks like a night vision scope at first glimpse

[tedtay17]

lloks like a green laser on the side

[maple.leaf]

My G36 - DMR variation.

[Death.]

lloks like a green laser on the side

word.
he speaks the truth

[TacoDelRio]

Nice M14 Mongoose, and nice G36 Maple Leaf. I'd like a G36K with the G36C shorter stock, and see if I can't adjust the CA G36's scope a tiny bit to get longer eye relief.

[TacoDelRio]

http://i6.photobucket.com/albums/y222/TacoDelRio/DSC01603.jpg

[Mongoose_nl]

lloks like a green laser on the side

Correct! :-)

http://www.xs4all.nl/~timmersg/photos/M14_02.jpg

[tenda]

http://i6.photobucket.com/albums/y222/TacoDelRio/DSC01603.jpg
.brrrrrrrrr...cold....!!!!!!!:)

[MatteoTSU77]

.brrrrrrrrr...cold....!!!!!!!:)

the Italian Alpine used to said "COLD GET STRONGER".....:)

[tenda]

the Italian Alpine used to said "COLD GET STRONGER".....:)
...well...we use to say too....but i'm old now so i need conforts...!!!:)

[Death.]

Correct! :-)

http://www.xs4all.nl/~timmersg/photos/M14_02.jpg

WHERE IS ZEH B34M ?!

nice m14

[Death.]

.brrrrrrrrr...cold....!!!!!!!:)

Haha, did Skorotsny get buried in an avalanche and all that survived was his m4?

[Mongoose_nl]

WHERE IS ZEH B34M ?!

nice m14

Thanks. This green laser does not have a visible beam. Only a very bright spot that is visible over a much longer distance than a red laser.

[Kartoon]

http://www.xs4all.nl/%7Etimmersg/photos/M14_02.jpg
Those gloves look damn sexy. Look comfy too. Model and manufacturer, please :hug: And a one sentence review please :D

[1Cie GevGn]

I bought a WA M1911A1 custom, with a metal kit. Sadly, the safety, slide catch, mag catch, and the whole back assembly were metal, but BLACK, while the metal slide and frame are a greyish colour.

So I painted it.

Result;

http://img360.imageshack.us/img360/7550/img20153mo.th.jpg (http://img360.imageshack.us/my.php?image=img20153mo.jpg)

As you see, the trigger is still black, but the rest is a very nice grey!

[Mongoose_nl]

Those gloves look damn sexy. Look comfy too. Model and manufacturer, please :hug: And a one sentence review please :D

They are very nice annd fit perfectly. In fact those gloves are over one year old and there are no markings on them. 4 weeks ago I found that trigger finger of glove is getting thin, so I wanted to buy new ones. Problem was that I didn't know brand and also didn't remember where I bought them. Than 2 weeks ago I went to shop to pick up my M14 and there I also saw those gloves. I bought me a new pair. They cost under 10 Euros, but I already thrown away package. I will see if I can find out brand!

[Mongoose_nl]

My other new baby...:-)

http://www.xs4all.nl/~timmersg/photos/MP7_01.jpg

[tenda]

My other new baby...:-)

http://www.xs4all.nl/~timmersg/photos/MP7_01.jpg
.mhhhhhhhhhhhh....sexy toyz....:)

[TacoDelRio]

Haha, did Skorotsny get buried in an avalanche and all that survived was his m4?

Haven't been in an avalanche yet.

If I was, I'm rpetty tall so you'd see a big clown sized boot stickin' up somewhere.

[Kilo1-1]

http://i6.photobucket.com/albums/y222/TacoDelRio/DSC01603.jpg
For some reason, that M4 looks really really good in that picture. Good work.
Without that plant on the right side, it would have looked something like from Tora Bora back in 01.

[Death.]

Haven't been in an avalanche yet.

If I was, I'm rpetty tall so you'd see a big clown sized boot stickin' up somewhere.

And a sombrero, right? :D

[TacoDelRio]

And a sombrero, right? :D

True. Out of the two times my car was broken into, my sombrero was left alone both times. It's lucky. Or it brings paint to me since I didn't usually leave it in my car.

KILO: Thanks dude. Alot of areas I train in are similar to Afghanistan's climate, where you've got alpine mountains, steep valleys, and deserts further than you'd ever care to drive through. I call it CHALUPASTAN.

[Kartoon]

They are very nice annd fit perfectly. In fact those gloves are over one year old and there are no markings on them. 4 weeks ago I found that trigger finger of glove is getting thin, so I wanted to buy new ones. Problem was that I didn't know brand and also didn't remember where I bought them. Than 2 weeks ago I went to shop to pick up my M14 and there I also saw those gloves. I bought me a new pair. They cost under 10 Euros, but I already thrown away package. I will see if I can find out brand!
Buy me a pair and ship'em to me :D
I mean really.
I'll pay you double.

[(Mondue)]

Fresh paint

http://img515.imageshack.us/img515/8554/epsn00017hg.th.jpg (http://img515.imageshack.us/my.php?image=epsn00017hg.jpg)
http://img515.imageshack.us/img515/8541/epsn00028tq.th.jpg (http://img515.imageshack.us/my.php?image=epsn00028tq.jpg)
http://img515.imageshack.us/img515/1489/epsn00032rf.th.jpg (http://img515.imageshack.us/my.php?image=epsn00032rf.jpg)
http://img515.imageshack.us/img515/8044/epsn00048uj.th.jpg (http://img515.imageshack.us/my.php?image=epsn00048uj.jpg)

[Kilo1-1]

Mondue, wow, that is amazing...
Excellent work!!

[Psico]

Guarder M14 Sopmod

http://www.venderia.com/galeria/albums/userpics/10002/DSC00032%7E0.JPG

CA M15A4 Ris with CA203

http://www.venderia.com/galeria/albums/userpics/10002/DSC00034.JPG

[tenda]

Mondue, wow, that is amazing...
Excellent work!!
x2 well done....p-)

[Mongoose_nl]

Guarder M14 Sopmod

http://www.venderia.com/galeria/albums/userpics/10002/DSC00032%7E0.JPG


Nice to see that I am not alone in using magpuls on M14. :-)

[TacoDelRio]

Holy crap Mondue, that paintjob is insane!

Good job!

[tedtay17]

ohhh mondue, yes i know that little bit of traitor, that is a nice paintjob, how long did it take you?