Pictures of your airsoft rifle

[Red Command NZ]

Ordering my Steyr AUG this afternoon...finally. Pics up soon
please tell me you arent buying a classic army one?!?!?


DONT DO IT!!!!!!!!!

it will be the worst purchase you ever make

[santana]

please tell me you arent buying a classic army one?!?!?


DONT DO IT!!!!!!!!!

it will be the worst purchase you ever make


And why is that???????????

[Red Command NZ]

And why is that???????????
cause its A grade ****.

i have had two of them, second is a replacement and it has the same problems as the first one.

first. the front grip is not under warranty so When (not if) it falls off you have to buy a new one.

second. if you remove a magazine with any bbs in, in any way but having the mag pointed to the ground bbs can get inside and get stuck behind the trigger and get into where the gearbox is.

third. the trigger system is crap. after a while(not long at all) the gun will not respond to the single fire part of the trigger pull and sometime after that it will stop responding to full auto trigger pull

so no doubt the externals are excellent, well except for the front grip, but the gun is not worth all the trouble

[zapatero]

G&G GR16 R4 with some upgrades in and out.

[Red_Fern]

cause its A grade ****.

i have had two of them, second is a replacement and it has the same problems as the first one.

first. the front grip is not under warranty so When (not if) it falls off you have to buy a new one.

second. if you remove a magazine with any bbs in, in any way but having the mag pointed to the ground bbs can get inside and get stuck behind the trigger and get into where the gearbox is.

third. the trigger system is crap. after a while(not long at all) the gun will not respond to the single fire part of the trigger pull and sometime after that it will stop responding to full auto trigger pull

so no doubt the externals are excellent, well except for the front grip, but the gun is not worth all the trouble


And why is that???????????


please tell me you arent buying a classic army one?!?!?


DONT DO IT!!!!!!!!!

it will be the worst purchase you ever make


You will be pleased to know it's not a Classic Army model. JG. Echo1 rebranded is all it is, and at a better price. woot

[Arnie100]

Good for you!! :)

[ABBATH249]

77630

77631

77632

Same Gun,new Optics p-)
Aimpoint Comp4 & 3x Magnifyer replica.
Brügger & Thomet Lowmount rail.
brügger & Thomet G3 Tri-Rail Handguard RIS
KA HK style Magazine.
TM G3A4 Retractable buttstock.
G&P Vertigrip
G&P big,ugly anpeq battery box..

[Xmith]

Very nice gun Abbath. I love that "used" look of the body and the contrast with the RIS.

[Red_Fern]

That's a kick@$$ G3. I like the RIS with the retractable stock. That's a combination I've never seen before, but it's neat.

[ABBATH249]

Thanks :-)
I aimed to build a Replica of our armed force`s upgraded AG3`s,called AG3F2.
There are more pictures of them in a couple of other treads here.
Believe it was the norwegian forces tread,or the G3 picture tread,

[Victory]

Is the c-mag really necessary?

It reminds me of an IAR, so I'll let it slide. p-)

-Vic

[el_magnífico]

Hi guys!

This is my A&K SR-25 but let's just call it Mk.11 ;)

http://i705.photobucket.com/albums/ww51/Commandante_IRon2/Mk11_paint.jpg

regards,

[Victory]

Looks good to me! :D

If you want to further add to the look, this might be of interest to you.

http://www.ebairsoft.com/knights-type-sniper-stock-p-1950.html

-Vic

[waize]

here is mine again. not as goodlooking as abbath's. bought g3 low mount and g&p red dot from him yesterday.

http://rpa.no/~mhs/netpic/Bildea%20001.jpg

[Oscar panzer]

http://i690.photobucket.com/albums/vv267/OscarPanzer/CIMG0389.jpg
http://i690.photobucket.com/albums/vv267/OscarPanzer/CIMG0390.jpg
http://i690.photobucket.com/albums/vv267/OscarPanzer/CIMG0386.jpg

[el_magnífico]

Looks good to me! :D

If you want to further add to the look, this might be of interest to you.

http://www.ebairsoft.com/knights-type-sniper-stock-p-1950.html

-Vic

thanks Vic!

I was wondering on this stock, but it would require battery modifications too, so I did not decided yet.

Aron

[waize]

hmm i think i have all those C&S magazines

[Flea NL]

The team AEG's:
http://i292.photobucket.com/albums/mm26/OneShotZero/Fort%20Barchon%204-5%20juli%202009/DSC_0016.jpg


And my new AEG-case
http://i292.photobucket.com/albums/mm26/OneShotZero/Fort%20Barchon%204-5%20juli%202009/DSC_0214.jpg

http://i292.photobucket.com/albums/mm26/OneShotZero/Fort%20Barchon%204-5%20juli%202009/DSC_0216.jpg

http://i292.photobucket.com/albums/mm26/OneShotZero/Fort%20Barchon%204-5%20juli%202009/DSC_0220.jpg

[Arnie100]

Nice, Flea, very nice! Your case rocks, too!

[Whitcomb]

Just got an Echo 1 416 today, will put up pictures when I get a chance.

[SnoeDae]

Just got an Echo 1 416 today, will put up pictures when I get a chance.


seen it, thanks though.

[Whitcomb]

seen it, thanks though.

Maybe others would like to see

[tactical73]

very nice Flea

[j3T.be]

http://i292.photobucket.com/albums/mm26/OneShotZero/Fort%20Barchon%204-5%20juli%202009/DSC_0216.jpg



What's up with the knife? I'd be happy to know the reason behind using this at an airsoft game.

To keep it on-topic, an old foto of my WA.

http://users.telenet.be/j3T/mil/DSC_000x2.JPG

[Kap]

Where I live we're really not allowed to bring knives on the field other than a rubber one. It cuts down on stupid accidents from hurting others or yourself.

[santana]

Where I live we're really not allowed to bring knives on the field other than a rubber one. It cuts down on stupid accidents from hurting others or yourself.

We use only knifes when after a game we prepare a delicious BBQp-)

[Flea NL]

What's up with the knife? I'd be happy to know the reason behind using this at an airsoft game.

Nothing much... to make the gear-look more "complete" ;)

And the knife will probably be illegal in NL.
So thats why it stays in the case, in Belgium.

[dwight]

Nothing much... to make the gear-look more "complete" ;)

And the knife will probably be illegal in NL.
So thats why it stays in the case, in Belgium.

Do you live near the border of belgium? I live 3 minutes driving from belguim.. The woods near me come out in belgium. It would be a nice play ground for you guys.

[Flea NL]

Yup, I live near Rotterdam, so it's pretty close.
It's about a hour drive for me.

So it's a nice solution to leave me AEG case with my buddy in Belgium.

So do you live near Breda? or....?

[Nephilim]

http://www.abload.de/thumb/dsc02444gk3m.jpg (http://www.abload.de/image.php?img=dsc02444gk3m.jpg)

[dwight]

Yup, I live near Rotterdam, so it's pretty close.
It's about a hour drive for me.

So it's a nice solution to leave me AEG case with my buddy in Belgium.

So do you live near Breda? or....?

I live in goirle, under tilburg. the woods I whas talking about is called gorp en rovert. it extends from goirle to poppel belgium. Its realy big.

I can walk to belgium if I would like:P

[Flea NL]

Sounds great !! ;)

Do you play airsoft you're self...?

[dwight]

Sounds great !! ;)

Do you play airsoft you're self...?

Nope, I'm thinking about giving it a try. A nice hobby for the weekend i think.

[Vince S]

http://www.abload.de/thumb/dsc02444gk3m.jpg (http://www.abload.de/image.php?img=dsc02444gk3m.jpg)
LLM? You f*cking whore! Where have you got that? p-)

[j3T.be]

Nope, I'm thinking about giving it a try. A nice hobby for the weekend i think.

Airsoft is illegal in the Netherlands though (same penalty as illegal possesion of firearms) so playing in that half dutch half belgian forrest of yours would be rather stupid. Just saying.

[SoundOFaGun]

Do you guys put real optics on these things? or do they make replicas for airsoft?

[Nephilim]

Replica mainly, but some also buy RS (which is bs in terms of scopes.)

[SoundOFaGun]

yeah, i was just thinking because im looking at all these guns and i see $$$$

[Nephilim]

LLM? You f*cking whore! Where have you got that? p-)





LOOOOOOOOOOOOOOOOOOOOOOOOOOOOOONG story.

[whiskey]

LOOOOOOOOOOOOOOOOOOOOOOOOOOOOOONG story.

tell it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Jalsky06]

My Mk18 Mod 0.
with Bipod and using 2 different Scope

http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs124.snc1/5328_96981847507_572517507_1959949_1731036_n.jpghttp://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs144.snc1/5328_96982037507_572517507_1959951_3539445_n.jpg

and like this

http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs144.snc1/5328_96982162507_572517507_1959952_4470043_n.jpghttp://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs144.snc1/5328_96982307507_572517507_1959953_4896395_n.jpg

it's look cooler with scope then with aimpoint

[whiskey]

http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs144.snc1/5328_96982307507_572517507_1959953_4896395_n.jpg

it's look cooler with scope then with aimpoint

thats the first time ever i see a scope with a aimpoint mount,
but it looks great!p-)

[dwight]

Airsoft is illegal in the Netherlands though (same penalty as illegal possesion of firearms) so playing in that half dutch half belgian forrest of yours would be rather stupid. Just saying.

It wont be if you stay on the belgium side. The belgium side is even bigger than the dutch.

[Ben_der]

http://i21.photobucket.com/albums/b271/SgtEversman/sfw.jpg
WE SFW (unfinished) Need a new Outerbarrel so that my C8 barrel extension will fit. The outerbarrel which is currently on it, has a 14 + thread, C8 extension needs 14 - thread.
But that's just a few bucks to spent p-)

[Red_Fern]

Nice M4. Did you do the paint yourself?

[Arnie100]

Post a pic of the finished one when you can, Ben_der! It's looking good!

[Overgaard]

http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs116.snc1/4712_90133704670_538654670_1913036_21892_n.jpg

PTW 07

[Nephilim]

nice gangsta grip :)

[Ben_der]

Nice M4. Did you do the paint yourself?
Ye. The painted parts are from my ICS SFW :)


Post a pic of the finished one when you can, Ben_der! It's looking good!
Sure will do, think I'll have the Outerbarrel with the 14mm left thread by the end of the month :)

Glad you like it, I love it p-)

[soldierkal]

My PTW with :
blank firing
RAS KAC
grip KAC
surefire m951 kit02
buis MATECH
Aimpoint QRD mount
http://img407.imageshack.us/img407/6125/dscf4634.jpg
http://img407.imageshack.us/i/dscf4634.jpg/

[Flea NL]

:| WOUW !! p-)

Great 2nd post!

[Ben_der]

Have to agree with Flea,
nice Blaster p-)

[Vince S]

My PTW with :
blank firing
RAS KAC
grip KAC
surefire m951 kit02
buis MATECH
Aimpoint QRD mount
http://img407.imageshack.us/img407/6125/dscf4634.jpg
http://img407.imageshack.us/i/dscf4634.jpg/

Nice AEG but next time just don't put real bullets next to it, looks super retarded.

What model of SF is on there?

[Flea NL]

surefire m951 kit02

[JC0352]

Nice AEG but next time just don't put real bullets next to it, looks super retarded.

In real life, BFA+live rounds=destroyed weapon, injury or death. In airsoft, it equals "really?! seriously?"

[airman3p031]

Current set up. DD Omega 7, TD mini VFG, Troy rear battle buis, Aimpoint. Still need a new grip either an ergo or a MIAD. Magpul trigger guard is in the mail.
http://i295.photobucket.com/albums/mm122/airman3p031/100_0264.jpg
http://i295.photobucket.com/albums/mm122/airman3p031/100_0279.jpg

[Red_Fern]

That foregrip looks really small.

[Bro Jangles]

That foregrip looks really small.
it is a stubby, helps with proper form.

[Kap]

Nice AEG but next time just don't put real bullets next to it, looks super retarded.

What model of SF is on there?



Yes the rounds are retarded, and the noob above him needs to take the stupid ear plugs off of his stock, another stupid noob thing to do. You would never put those in YOUR EARS after being out on patrol all day in IRAQ / AFGHANISTAN. You'll be in the BAS or TMC the next day complaining that your ears severely hurt.

I need to find that original photo where people keep putting ear plugs in their stocks, because everyone I saw in Iraq did not do that ****. So neither should airsofters, stupid trend setters.

[santana]

Current set up. DD Omega 7, TD mini VFG, Troy rear battle buis, Aimpoint. Still need a new grip either an ergo or a MIAD. Magpul trigger guard is in the mail.
http://i295.photobucket.com/albums/mm122/airman3p031/100_0264.jpg



Nice AEG Airman, The grip really looks small. Any way waiting to see pictures of the Patch that I sended on your uniform.

[soldierkal]

back with my new scope 4X32 ACOG replica
http://img33.imageshack.us/img33/1411/dscf4654.jpg

http://img522.imageshack.us/img522/5228/dscf4655.jpg

[Nephilim]

I need to find that original photo where people keep putting ear plugs in their stocks, because everyone I saw in Iraq did not do that ****. So neither should airsofters, stupid trend setters.

HA! I bet it was done on purpose Kap..
A while ago so german softairplayers started calling shemag a "shemale" on purpose. Soon some kiddies added a "shemal"e to their kitlist ;)

[Overgaard]

Yes the rounds are retarded, and the noob above him needs to take the stupid ear plugs off of his stock, another stupid noob thing to do. You would never put those in YOUR EARS after being out on patrol all day in IRAQ / AFGHANISTAN. You'll be in the BAS or TMC the next day complaining that your ears severely hurt.

I need to find that original photo where people keep putting ear plugs in their stocks, because everyone I saw in Iraq did not do that ****. So neither should airsofters, stupid trend setters.




I am very sorry if i offended you Kap and you are absolutley right: i'v never been to Irak or any war, i only tryed contribute with a fairytale imitation/re-enactment airsoft gun. I really admire the men and women overseas, both from Denmark and The States like you.

Any way; Thank you Nephilim i was trying to make it look like the boomstick the delta guys used for bin laden hunt.


Ref:
http://www.facebook.com/l.php?u=http%3A%2F%2Fupload.wikimedia.org%2Fwikipedia%2Fcommons%2F7%2F71%2FDelta_force_GIs_disguised_as_Afghan_civilians%2C_November_2001_C.jpg&h=129a8d1c768bb8189b32af7baac94e7a

[vor033]

Hi guys!

This is my A&K SR-25 but let's just call it Mk.11 ;)

http://i705.photobucket.com/albums/ww51/Commandante_IRon2/Mk11_paint.jpg

regards,

Hi Mate, thats really nice :)

[Kap]

I am very sorry if i offended you Kap and you are absolutley right: i'v never been to Irak or any war, i only tryed contribute with a fairytale imitation/re-enactment airsoft gun. I really admire the men and women overseas, both from Denmark and The States like you.

Any way; Thank you Nephilim i was trying to make it look like the boomstick the delta guys used for bin laden hunt.


Ref:
http://www.facebook.com/l.php?u=http%3A%2F%2Fupload.wikimedia.org%2Fwikipedia%2Fcommons%2F7%2F71%2FDelta_force_GIs_disguised_as_Afghan_civilians%2C_November_2001_C.jpg&h=129a8d1c768bb8189b32af7baac94e7a

Sorry man, it's just every time I see it I think something switches off in my brain and I just rant like that. I mean no offense to you guys either since I play airsoft myself, but there are just some things airsofters should not do if they truly are trying to be authentic in nature.

I apologize. As you begin to frequent this forum more, if you do, you'll get to know me that if I rant just ignore me. lol

[Kap]

To put this back on topic, here are my most used airsoft rifles this year.

A VFC AK74 and my PTW MAX M4

http://img36.imageshack.us/img36/5343/dsc04773f.jpg (http://img36.imageshack.us/i/dsc04773f.jpg/)

http://img195.imageshack.us/img195/2273/dsc04774w.jpg (http://img195.imageshack.us/i/dsc04774w.jpg/)

[santana]

To put this back on topic, here are my most used airsoft rifles this year.

A VFC AK74 and my PTW MAX M4

[/URL]

[URL="http://img195.imageshack.us/i/dsc04774w.jpg/"]http://img195.imageshack.us/img195/2273/dsc04774w.jpg (http://img36.imageshack.us/i/dsc04773f.jpg/)

Well that PTW MAX M4 is just awesome!!!

[Kap]

I love it, but when shipments are being stopped coming into the US, actual PTWs and parts are so scarce right now. Makes me almost not want to play with it until I can get some extra parts, or it will be down for months at a time. :|

[Vince S]

I love it, but when shipments are being stopped coming into the US, actual PTWs and parts are so scarce right now. Makes me almost not want to play with it until I can get some extra parts, or it will be down for months at a time. :|


Why are parts being stopped by customs? I thought AS was legal down there.

[santana]

Why are parts being stopped by customs? I thought AS was legal down there.

Yeah, I was going to make the same question!!!

[Bro Jangles]

To put this back on topic, here are my most used airsoft rifles this year.

A VFC AK74 and my PTW MAX M4

http://img36.imageshack.us/img36/5343/dsc04773f.jpg (http://img36.imageshack.us/i/dsc04773f.jpg/)

thats some purty wood, is it real wood?

[Red_Fern]

Hahahaha you said purty wood. rofl

Yeah... why is customs intercepting shipments now?

[Kap]

Why are parts being stopped by customs? I thought AS was legal down there.

Apparently some gas blowback rifles are being confiscated because they have the potential to be turned into real firearms!? ATF is very gay. So when it's in one shipment, I believe everything in that shipment is put on hold, and it usually takes FORRRRRRREVER.


thats some purty wood, is it real wood?

Hell yeah it is. Super purrrty.

[Red_Fern]

How can they potentially be turned into real firearms? That's interesting...

[airman3p031]

i heard from my dealer that its a temp hold on production from systema and they should be back to norm in the fall. I hope

[Nephilim]

How can they potentially be turned into real firearms? That's interesting...Those GBB´s are similarly constructed to RS firearms, in terms of the mechanism, unlike AEG´s afaik.
However, i seriously doubt one would so stupid enough to fire live ammo through an GBB/AEG.. the alloy wouldn´t withstand it and would blow a load of shards into your face..
On the other hand...

[Bro Jangles]

Those GBB´s are similarly constructed to RS firearms, in terms of the mechanism, unlike AEG´s afaik.
However, i seriously doubt one would so stupid enough to fire live ammo through an GBB/AEG.. the alloy wouldn´t withstand it and would blow a load of shards into your face..
On the other hand...
you can turn a piece of pipe and a hinge into a gun, but Home depot is still open. such BS, and im not an airsofter.

[Nephilim]

you can turn a piece of pipe and a hinge into a gun, but Home depot is still open. such BS, and im not an airsofter. ´course its easier to build a zip gun, and more solid most porpably..
That´s why the whole thing sounds ridiculous anyway..
I guess the guys are just concerned about that items, classified as toys, could be turned into real fireams.

[Red_Fern]

Then again if someone's determined enough, they can make a weapon out of anything..

I just hate how the behaviour of irresponsible people punishes everyone else.:bash:

[Kravensas]

@ Kap: why 3 kind of cylinder?
anyway, very nice M4!

(and the ak too, but too clean to be a kalashnikov!)


i heard from my dealer that its a temp hold on production from systema and they should be back to norm in the fall. I hope

I heard the same. A friend of mine, who run an airsoftshop, tell me that this "hold" is caused by financial problem...

[Kap]

@ Kap: why 3 kind of cylinder?
anyway, very nice M4!

(and the ak too, but too clean to be a kalashnikov!)



I heard the same. A friend of mine, who run an airsoftshop, tell me that this "hold" is caused by financial problem...

I have 4 cylinders, I use the Black for night games so I don't hurt people from accidental close shots. The other cylinders are for day games and for particular fields that allow XXX FPS. My red is kinda weak right now though, a possible leak because it shoots 420 FPS.

My AK was very dirty from the last game I used it in, so that is the only reason why it is clean now, because I cleaned it. ;)

I had to because I got a ton of green face paint smeared all over the grip and foregrip, took forever to scrub it off.

[Kravensas]

I had to because I got a ton of green face paint smeared all over the grip and foregrip.

On mine, with some abrasive paper glass and nytro solvent, I get it a lil'older...

[el_magnífico]

Hi Mate, thats really nice :)

Thank you!

:)

[SlyACU]

http://img521.imageshack.us/img521/290/photo0049o.th.jpg (http://img521.imageshack.us/i/photo0049o.jpg/)
http://img521.imageshack.us/img521/9651/photo0050u.th.jpg (http://img521.imageshack.us/i/photo0050u.jpg/)
http://img521.imageshack.us/img521/8025/photo0051v.th.jpg (http://img521.imageshack.us/i/photo0051v.jpg/)

[Bro Jangles]

great Patch.

[DZNK]

Nothing special, just ordinary M4A1 (M15A4 RAS Classic Army). Yesterday i ordered AN/PEQ-15 (Dark Earth) Replica, so carbine will get some MSOB look : )

http://img267.imageshack.us/img267/496/p1010890m.th.jpg (http://img267.imageshack.us/i/p1010890m.jpg/)

http://img83.imageshack.us/img83/1618/p1010891.th.jpg (http://img83.imageshack.us/i/p1010891.jpg/)

[TomasPower]

Buy a crane stock and put your batteries there, because now those vires don't look that good.

[DZNK]

Thanks for advice, I think that same.

[Vince S]

Both my AEG

14.5
http://i288.photobucket.com/albums/ll196/vinceairsoft/M4145.jpg

10.5 (wich can be turned into a 16in C8 with my barrel extension)
http://i288.photobucket.com/albums/ll196/vinceairsoft/M4105.jpg

[Red_Fern]

Sick lizard print camo. That's sweet.

[Vince S]

Sick lizard print camo. That's sweet.

5min job with a sniper veil p-)

[Red_Fern]

That's neat.. I'd not thought of doing it that way. Crafty.

[Kap]

Nice airsoft guns.

[click]

I like the 10.5 in one. Looks sweet! What brand is it?

[Vince S]

I like the 10.5 in one. Looks sweet! What brand is it?

Both are uber bastards. I don't see the point of investing high amounts of money into these toys (well they certainly cost a bit but not as much as some people, say PTW). So basically both have Dboys metal body, TM front ends, whatever cheap brand RIS, whatever cheap Ebay repro optics and Dboys mechbox.

They shoot straight and are reliable. That's all that count!

[Kap]

Both are uber bastards. I don't see the point of investing high amounts of money into these toys (well they certainly cost a bit but not as much as some people, say PTW). So basically both have Dboys metal body, TM front ends, whatever cheap brand RIS, whatever cheap Ebay repro optics and Dboys mechbox.

They shoot straight and are reliable. That's all that count!

Don't be taking a crack at me whore! rofl

[Vince S]

Don't be taking a crack at me whore! rofl

Oh I'd never do that p-)

Naw seriously PTW are nice but I've seen way too many die up here. All the people I knew sold them. Seems the Canadian winter is hard on these babies

[Kap]

Oh I'd never do that p-)

Naw seriously PTW are nice but I've seen way too many die up here. All the people I knew sold them. Seems the Canadian winter is hard on these babies

That is why I don't play in the winter, MN winters are as bad as Canadian ones.

[Vince S]

That is why I don't play in the winter, MN winters are as bad as Canadian ones.

TM based gun do certainly work rofl Plus winter games are awsome since they're not the usual Afghan or Iraq scenario!

[Kap]

TM based gun do certainly work rofl Plus winter games are awsome since they're not the usual Afghan or Iraq scenario!

God so true. At least some "winter warfare". But I don't feel like breaking an ass ton of guns.

[Vince S]

God so true. At least some "winter warfare". But I don't feel like breaking an ass ton of guns.

Troof, that's why there's indoor CQB but then again this defeats the whole "no afghan or iraq" scenarios :cantbeli:

[Kap]

Troof, that's why there's indoor CQB but then again this defeats the whole "no afghan or iraq" scenarios :cantbeli:

We don't have anything like that here, everything is outdoors, kinda sucks. :(

[Vince S]

We don't have anything like that here, everything is outdoors, kinda sucks. :(

We had this very awsome venue, an old paper mill, 4 stories plus one basement. With furniture still in. But some organisers brought in some dump people and now the place is crap... Plus the owner is just letting the building rot while we pay to price to play in there. Last year there was black mold on 4th floor...

Oh well, we'll go hunting for another abandonned place p-)

[Whitcomb]

We had this very awsome venue, an old paper mill, 4 stories plus one basement. With furniture still in. But some organisers brought in some dump people and now the place is crap... Plus the owner is just letting the building rot while we pay to price to play in there. Last year there was black mold on 4th floor...

Oh well, we'll go hunting for another abandonned place p-)

For those of you that live in Massachusetts and Southern New Hampshire, I heard a rumor that someone is looking at turning the old Coca-Cola Plant on Rt. 28 in Salem into a possible CQB area. Then again, it is just a rumor. Hopefully it will come to be true.

[Pancake]

:DHi all, I am wargamer from Hong Kong
Hope you all enjoy my WA GBB M4, also my Kimber MARSOC
Cheers~
http://i243.photobucket.com/albums/ff221/pancakefung/DSC_0097A.jpg
http://i243.photobucket.com/albums/ff221/pancakefung/DSC_1940-01-1.jpg

[Flea NL]

Great first post!

I'm a fan.... ;)

[Red Command NZ]

:DHi all, I am wargamer from Hong Kong
Hope you all enjoy my WA GBB M4, also my Kimber MARSOC
Cheers~
http://i243.photobucket.com/albums/ff221/pancakefung/DSC_0097A.jpg
http://i243.photobucket.com/albums/ff221/pancakefung/DSC_1940-01-1.jpg

my jaw dropped, that thing is sexy

[Jungle88]

First up is my indoor/CQB gun, it's a CA sportline 416.

http://i152.photobucket.com/albums/s200/Vytra/006-2.jpg

Soon to come: Magpul XT rail covers, replica M900 foregrip, Echo 1 tracer unit.

Next up is my outdoor gun a KWA M4a1. It has Magpul MOE handguards, 417 style stock, G16 pistol grip.

http://i152.photobucket.com/albums/s200/Vytra/004-6.jpg

Soon to come: KAC style rear sight, Madbull quicksilver silencer.

[santana]

I want to see the Madbull quicksilver silencer!!!

[tactical73]

:DHi all, I am wargamer from Hong Kong
Hope you all enjoy my WA GBB M4, also my Kimber MARSOC
Cheers~
http://i243.photobucket.com/albums/ff221/pancakefung/DSC_0097A.jpg
http://i243.photobucket.com/albums/ff221/pancakefung/DSC_1940-01-1.jpg
wow ,very nice ;-)

[Flea NL]

http://i243.photobucket.com/albums/ff221/pancakefung/DSC_0097A.jpg


I just realized something.
Thats a GBB, right...?

And you've got a Pmag in there.
Is it only for show? Or is it a "gas-Pmag"?

[ich122]

modified my m14 to an crazy horse

http://s7.directupload.net/images/090728/temp/dtp3brqv.jpg (http://s7.directupload.net/file/d/1869/dtp3brqv_jpg.htm) http://s1.directupload.net/images/090728/temp/ty65suqh.jpg (http://s1.directupload.net/file/d/1869/ty65suqh_jpg.htm) http://s12.directupload.net/images/090728/temp/vqdpnz9e.jpg (http://s12.directupload.net/file/d/1869/vqdpnz9e_jpg.htm) http://s7.directupload.net/images/090728/temp/ii659sbk.jpg (http://s7.directupload.net/file/d/1869/ii659sbk_jpg.htm)
http://s8.directupload.net/images/090728/temp/a87jd74m.jpg (http://s8.directupload.net/file/d/1869/a87jd74m_jpg.htm)

[sprint1050]

Here is my M4 (was made with a variety of parts that came up here, exchanges and other purchased) and it become this.( the yellow paint that Portuguese law)

http://i273.photobucket.com/albums/jj210/sprint1050/IMAG0009-9.jpg


http://i273.photobucket.com/albums/jj210/sprint1050/IMAG0012-5.jpg

I will replace the grip by a gripod

[Kinkku]

My main gun and all its accessory parts. Well not all the mags ;)


78792

[Kinkku]

Another one.

78793

[Kinkku]

Still coming. I still have an M4 CQB with a CASV style front set and spr frontsight. I will upload it here as soon as my friend repairs it.
78825

78795

[Kinkku]

I didn´t find any topics about pistol pics so i posted them here.


78823
78824

[santana]

[QUOTE=Kinkku;4300416]Still coming. I still have an M4 CQB with a CASV style front set and spr frontsight. I will upload it here as soon as my friend repairs it.



those patches are real?

[Kinkku]

No those are not real. I totally forgot that impersonate part, i'm not trying to pose as any real US army member or anythin. I can edit those pictures if they offend someone.

[Rabbity]

3 words.

Black Sqaures Now

[Bro Jangles]

3 words.

Black Sqaures Now
Black squares doesnt make you a smaller douche

[Rabbity]

Black squares doesnt make you a smaller douche

I was thinking more short term application rather than long term with me going around with a knife and cutting off unearned tabs.

[sear]

JG G3 A3 and RAS:

http://i230.photobucket.com/albums/ee127/krusc/twog3s2.jpg

http://i230.photobucket.com/albums/ee127/krusc/twog3s4.jpg

[Red_Fern]

No those are not real. I totally forgot that impersonate part, i'm not trying to pose as any real US army member or anythin. I can edit those pictures if they offend someone.

Or you could just not post photos with patches you aren't supposed to wear. rofl

just trying to help you not get banned

[Rabbity]

http://img188.imageshack.us/img188/3576/003ncx.jpg
From left to right.
ACM Masada -
-Vector Arms SPR Scope
-LaRue SPR QD mount
-Systema Torque up gears
-Systema Magnum
-DB Custom 6.01
-Modify Piston and Piston head

KWA M4
-Hurricane EOtech
-VLTOR Crane stock
-Surefire M900 rep
-King Arms PEQ-15
-MODIFY piston head

-DBOYS 416
-Aimpoint Micro

AGM M4 GBBr
-RA-Tech Bolt
-RRA Buffer
-Tango Down stubby vert grip
-Vector Optics reddot

[mrmojorisin124]

Those guns are pretty insane my friend!

[Bro Jangles]

Airsoft Massada? i want it!

[Kap]

I raped my poor PTW, now it is a little stubby. rofl

[/URL][URL="http://img36.imageshack.us/i/dsc04790n.jpg/"]http://img36.imageshack.us/img36/9854/dsc04790n.jpg (http://img36.imageshack.us/i/dsc04790n.jpg/)

[Rabbity]

Airsoft Massada? i want it!


They're stupid hard to get in the country, mine was stuck in custom for almost a month.

BTW PTW's = Lame

[Vince S]

They're stupid hard to get in the country, mine was stuck in custom for almost a month.

BTW PTW's = Lame

Happy to see I'm not the only one to think that (sorry Kap p-))

[Rabbity]

I remember the whole phase of "Sweet PTW's are uberleet blah blah blah" other than a really nice trigger response that can be dealt with by using a lipo..they're not that durable, mine was horribly inaccurate, and mags..are freaking expensive.

[santana]

Hey Kap, cool M4, its getting better every time you posted here.
And the Masada, wow!!! its insane, I guess is an awesome AEG.

[Bro Jangles]

kap, is your TD bipod upside down?

[Kap]

Bunch of jealous haters, mine has been nothing but fun and works great. No they are not upside down BJ, you noob. And however, I will put them how I want. When they are in the down position they are flush with the surface. If it was upside down, then why is the logo right side up?

[Kap]

I remember the whole phase of "Sweet PTW's are uberleet blah blah blah" other than a really nice trigger response that can be dealt with by using a lipo..they're not that durable, mine was horribly inaccurate, and mags..are freaking expensive.

Sounds like you got a lemon, or you just suck. There are other replica mags for it that are much cheaper. You obviously went the wrong route.

Also says the guy who is on the band wagon with owning an ACM or A&K Masada which break in the first 5 seconds. rofl

[Bro Jangles]

No they are not upside down BJ, you noob.
:-(

looked into real ones for my AR, always seen em the other way.

[Rabbity]

Sounds like you got a lemon, or you just suck. There are other replica mags for it that are much cheaper. You obviously went the wrong route.

Also says the guy who is on the band wagon with owning an ACM or A&K Masada which break in the first 5 seconds. rofl

sad part is that the Masada has been more reliable than the first set of PTW's I've owned lol, I'm pretty sure they weren't lemons though considering I got the Mil/LE line of PTW's. Then again..we all know how the Army buys stuff...

[Vince S]

Bunch of jealous haters, mine has been nothing but fun and works great. ?

Meh I'm just one those "hey for the price of one PTW I can have 3 AEG" p-)

I'll give a few pros to the PTW, I've never handled any other airsoft that is that tight. Even my full metal ones are a little wobbly.

Trigger response (though I just learned LiPo could do the trick, thought they only gave insane ROF)

Operation: Want it or not hell they are realistic (hence the name perhaps LOL), and though I'm not usually one that jumps on the OMFG Realism bandwaggon , slapping the bolt catch when reloading is a nice touch

But hey gotta say I prefer yours in the stubby setup than 14.5"

[tactical73]

I raped my poor PTW, now it is a little stubby. rofl

http://img36.imageshack.us/img36/9854/dsc04790n.jpg (http://img36.imageshack.us/i/dsc04790n.jpg/)
good job ;-)

[Kap]

Meh I'm just one those "hey for the price of one PTW I can have 3 AEG" p-)

I'll give a few pros to the PTW, I've never handled any other airsoft that is that tight. Even my full metal ones are a little wobbly.

Trigger response (though I just learned LiPo could do the trick, thought they only gave insane ROF)

Operation: Want it or not hell they are realistic (hence the name perhaps LOL), and though I'm not usually one that jumps on the OMFG Realism bandwaggon , slapping the bolt catch when reloading is a nice touch

But hey gotta say I prefer yours in the stubby setup than 14.5"

I just use it because I hate maintenance on my guns. Some of the repairs I've spent on my other guns have gone way over the price of a PTW SCK (challenge kit) 850$. My G3s are the perps, and I basically haven't used them anymore even though they are fully repaired. Also for how many guns I have, my PTW was the last purchase I've ever made for a gun. So in terms, I don't need 3 more AEGs, they will end up not being used. I don't play airsoft so often, about a game a month, sometimes 2 per month.


Also as I see it, not every gun is Lipo ready... I watched one of my friends who used a pretty much stock weapon and it tore the piston to pieces. Hell I think you can get away with using a lipo with a Marui though. A lipo any day will beat a PTW in terms of ROF. But I'm not trying to belch out an insane 20-25 BPS like some guys I know. (Not on this board but who I play with) The more I think of it, a Lipo reminds me of a paintballer... rofl

I don't slap bolt catches, or forward assists... I don't use it for its realism, I've used it for its reliability so far. I play some milsim games, but I make it as non-milsim as I can get away with. I just like to play airsoft to have fun. I got more than a few friends going to OP: Irene this year and I flat out told them, have fun playing with some bag ass posers on the Ranger side. If I ever could muster paying 180-230 or whatever the price is for an airsoft game to attend that, I would RATHER be on the FF team (skinnys, or however they call them.)

Also last but not least, I really like the stubby set up, I am a smaller person (I hate being a chick) so having it short is a plus for me. Reg M4s aren't bad, but being the CQBR barrel is even better. ;)

Anyways no hard feelings, I think I was just a little irritated last night. The fact I wanted to get blasted, but I forgot I had work in the morning. Dumb Army, should of put in a leave slip. :fork:

[Pancake]

I just realized something.
Thats a GBB, right...?

And you've got a Pmag in there.
Is it only for show? Or is it a "gas-Pmag"?
HAHA~ Check this out~
http://www.youtube.com/watch?v=X0_T2aAI7X4

[zapatero]

I saw a similar one for the WE M4 just recently at the GasGuns forum. Seems to be regular GBB M4 mag with a ripped off Pmag skin...

[airman3p031]

I love my ptw its the mil/le model but Im getting a second ptw cqbr max versions soon. Hey Kap you like that grip? Is it the king arms one or a G&P? Have been looking for a grip thats a little fatter then the normal M4 grip.

[Kap]

I love my ptw its the mil/le model but Im getting a second ptw cqbr max versions soon. Hey Kap you like that grip? Is it the king arms one or a G&P? Have been looking for a grip thats a little fatter then the normal M4 grip.


Or how about you save yourself some cash and just get another upper receiver with CQBR barrel so you can switch on the fly. Otherwise 2 PTWs is more redundant than the word redundant itself...

It's a tango down grip.

[Flea NL]

@ Pancake, thats cool!!
hahaha nice !!

[airman3p031]

I know what the vert grip is I have one myself. I mean the regular(motor) grip. Well im getting a good deal on a SCK and figured I would try and build it. 500 for a new SCK isnt bad.

[Kap]

I know what the vert grip is I have one myself. I mean the regular(motor) grip. Well im getting a good deal on a SCK and figured I would try and build it. 500 for a new SCK isnt bad.

Oh my bad, you mean the pistol grip, it is the King Arms G27 grip. It's awesome.

[airman3p031]

Its a little bit larger then the normal M4 grip right? I was looking at one cause I like the MIADs size but I wont buy a real steel MIAD and mod it Im gonna have a hard enought time with the SCK. Lol. Hey did you build your SCK yourself or have a shop do it? Ya got any advice for someone about to try and build it(if you built yours that is)?

[Kap]

Its a little bit larger then the normal M4 grip right? I was looking at one cause I like the MIADs size but I wont buy a real steel MIAD and mod it Im gonna have a hard enought time with the SCK. Lol. Hey did you build your SCK yourself or have a shop do it? Ya got any advice for someone about to try and build it(if you built yours that is)?

Yes it is bigger than the reg M4 grip. I like it because it is more comfortable. I built my own, and I'll pretty much say the main ingredients you'll want in order to built the rifle is a soldering kit, gear grease, cylinder grease, and an armorers wrench (in order to put on the barrel). You won't need a a vice or anything, just hold it in your lap when you're doing it. Also I believe there is a complete SCK manual online that is official on how to put one together. Just google for it.

[airman3p031]

Sweet thanks alot Kap. Im gonna have to get that grip I hate the normal M4 grip doesnt feel right in the hand lol.

[Vince S]

I just use it because I hate maintenance on my guns. Some of the repairs I've spent on my other guns have gone way over the price of a PTW SCK (challenge kit) 850$. .


****ing hell... Make that 1300$ here. And that's just the gun itself, no mags.

[airman3p031]

thats why I couldnt say no to a new 08 one for 500 lol

[elvenas]

http://i574.photobucket.com/albums/ss190/elvenaseal/Blasters/DSCN4688.jpg

http://i574.photobucket.com/albums/ss190/elvenaseal/Blasters/DSCN4689.jpg

[Kap]

****ing hell... Make that 1300$ here. And that's just the gun itself, no mags.

I rather buy that then spend more on sniper rifles that can't work for **** until you pump another 1-2 grand of work in them *cough* Barrett *cough* Even cheaper than some SAWs

[freethinker]

JG G3 A3 and RAS:

http://i230.photobucket.com/albums/ee127/krusc/twog3s2.jpg

http://i230.photobucket.com/albums/ee127/krusc/twog3s4.jpg

Here is mine.....

78893

[Victory]

looked into real ones for my AR, always seen em the other way.

There are a couple different versions of the VLTOR bi-pod. You might be thinking of the one that mounts to the bottom (6 o'clock) rail.

I'd consider one for my A3 (which should arrive in a week or so...the waiting game is oh, so fun), but, due to the LaRue FUG, it won't be compatible. (And no, I won't swap out the FUG for a TangoDown. ;))

So I'll probably nab a Grippod. The A3 is like a civilian IAR, so it only makes sense, right? :-P

-Vic

[Vince S]

I rather buy that then spend more on sniper rifles that can't work for **** until you pump another 1-2 grand of work in them *cough* Barrett *cough* Even cheaper than some SAWs

Well buying a PTW and everything that comes with it pretty much like getting fist****ed with barbwire gloves... Lots of cheaper solutions. Hurray for Canadian retailers :roll:

Hell we pay JG/Echo1 like 5 times what you guys pay

[Kap]

Get the hell out of Canada then, lol. I probably wouldn't have one either if I lived there.

[mrmojorisin124]

http://i574.photobucket.com/albums/ss190/elvenaseal/Blasters/DSCN4688.jpg

http://i574.photobucket.com/albums/ss190/elvenaseal/Blasters/DSCN4689.jpg

Ok this thing is INSANE! It brought tears to my eyes its so beautiful! Ok not really but I'm just saying. Nuts

[zapatero]

Sexy rifle indeed. Is that a WE M4 GBB? If yes, how did you get the free floating RIS installed?

[elvenas]

Sexy rifle indeed. Is that a WE M4 GBB? If yes, how did you get the free floating RIS installed?

Yes brother! is WE TTI M4 GBB.
Floating RIS is Daniel Defense MK18 II,you have ris copies,is very easy to install, not a big problem.

regards

[zapatero]

Yes brother! is WE TTI M4 GBB.
Floating RIS is Daniel Defense MK18 II,you have ris copies,is very easy to install, not a big problem.

regards
Thanks mate! I owe you a drink. I'm thinking of putting DD rail on mine (China copy) and wasn't quite sure if it fits. The posts on the GasGuns forum pointed out that there is a problem with the barrel nut. I'll PM you regarding the technical issues.

[elvenas]

Thanks mate! I owe you a drink. I'm thinking of putting DD rail on mine (China copy) and wasn't quite sure if it fits. The posts on the GasGuns forum pointed out that there is a problem with the barrel nut. I'll PM you regarding the technical issues.
nono no problem,my floating RIS is the China copy!copy of DD original.
I can tell you is installed to perfection
if you want to talk for mp, you peak Spanish no?

[Puding]

hello front the republic of ireland long time reader first time poster as they say

http://i46.photobucket.com/albums/f128/irishpuding/DSC_51160001.jpg
http://i46.photobucket.com/albums/f128/irishpuding/DSC_51430001.jpg
ares tavor with eotech
http://i46.photobucket.com/albums/f128/irishpuding/DSC_51390001.jpg
star m4a1
http://i46.photobucket.com/albums/f128/irishpuding/DSC_49170001.jpg
vfc ak74

[Kap]

Very nice first post Puding. Btw I got the same VFC AK74. I love mine!

[Vince S]

Mmmmmmmmmmmmm Tavor are damnnnnnnnnnnn sweet!!!

[Bibon]

HI!

Here is my RS SVD and me using Partizan Sniper Suit

http://img509.imageshack.us/img509/6794/dsc00762x.jpg

http://img509.imageshack.us/img509/8295/dsc00763v.jpg

http://img339.imageshack.us/img339/8272/dsc00766.jpg

[Kap]

Nice SVD, how well does it work?

[bradcapo2]

Thanks for sharing this useful information. It's great.


plan solution commission de surendettement (http://dossierdesurendettement.org/) - commission de surendettement, vous pouvez demander un dossier de surendettement.plan solution commission de surendettement (http://dossierdesurendettement.org/)

[santana]

hello front the republic of ireland long time reader first time poster as they say

http://i46.photobucket.com/albums/f128/irishpuding/DSC_51160001.jpg

ares tavor with eotech



vfc ak74

Wow!!! Amaizng first post. Dude welcome to MP.net please post more pictures of the Tavor and your gear.

[Red_Fern]

SWEET Tavor! I haven't seen too many of those in airsoft. Neat to see it's catching on, though.

[Arnie100]

I got one too! Still gotta figure out how to zero the laser sight!!

http://img38.imageshack.us/img38/8656/rifle2.png (http://img38.imageshack.us/i/rifle2.png/)

@ Puding, you got some great stuff there, also! I like your IDF gear!

[Red_Fern]

You lot just have to rub it in, don't you? rofl
I seem to have developed a thing for bullpup weapons... I do believe a Tavor will be my next investment.

[Arnie100]

Join us who has Tavors, Red_Fern, you know you want to!

[Red_Fern]

Maybe soon. I'm quite content with my current "arsenal" rofl rofl
Plus university starts soon, so I need to save my $$$ for any unforseen expenses which may arise. But maybe soon.

[Rhodius3D]

hello front the republic of ireland long time reader first time poster as they say

http://i46.photobucket.com/albums/f128/irishpuding/DSC_51160001.jpg
http://i46.photobucket.com/albums/f128/irishpuding/DSC_51430001.jpg
ares tavor with eotech
http://i46.photobucket.com/albums/f128/irishpuding/DSC_51390001.jpg
star m4a1
http://i46.photobucket.com/albums/f128/irishpuding/DSC_49170001.jpg
vfc ak74

Great post!!
I used my friends tavor at the last game, very nice but a bit heavy at the back. The balance is not right i think, not like the Aug.

[bugyere]

http://www.militaryphotos.net/forums/picture.php?albumid=1238&pictureid=15131

[Bibon]

Nice SVD, how well does it work?


4/10 hits at A4 paper at 65 m with 0,30 bbs!

9/10 hits at 50m!!!!


Performance is solid for stock AEG but materials,smell,weight,balance... You have to see it to believe it!!!!!!


INSTANT HARD ON!!!

[Kap]

4/10 hits at A4 paper at 65 m with 0,30 bbs!

9/10 hits at 50m!!!!


Performance is solid for stock AEG but materials,smell,weight,balance... You have to see it to believe it!!!!!!


INSTANT HARD ON!!!

Very nice, I always liked the SVD. I dunno if I'd ever have use for it though, since I don't "snipe". Thanks for the information. :)

[the_13th_redneck]

50m snipe??
Dear lord...

[Bibon]

50m snipe??
Dear lord...


Yeah,not what you would call *death from afar* but hey!! Its airsoft!!!:)

Im planning to put 150 spring inside! Should increase distance and fps!!!

[flyinggoldfish]

Lasgun:
http://i21.photobucket.com/albums/b272/flyinggoldfish/Airsoft/DSCF8488.jpg

Minor AUG infestation:
http://i21.photobucket.com/albums/b272/flyinggoldfish/Airsoft/DSCF9018.jpg

Not strictly mine, but a custom job I did for a mate...
http://i21.photobucket.com/albums/b272/flyinggoldfish/Airsoft/DSCF9011.jpg

[Uruk-Hai]

M4 Desert camo in Polish forest

http://img161.imagevenue.com/img.php?image=39753_P1090130_122_787lo.JPG

http://img187.imagevenue.com/img.php?image=39760_P1090127_122_931lo.JPGhttp://img133.imagevenue.com/aAfkjfp01fo1i-11359/loc395/38052_P1090130_122_395lo.JPG
http://img133.imagevenue.com/aAfkjfp01fo1i-26437/loc395/38052_P1090130_122_395lo.JPG
http://img240.imagevenue.com/aAfkjfp01fo1i-8539/loc10/38077_P1090127_122_10lo.JPG

[TAC]

Hi

http://img228.imageshack.us/img228/710/imag0612.jpg (http://img228.imageshack.us/i/imag0612.jpg/)

http://img232.imageshack.us/img232/4327/imag0613.jpg (http://img232.imageshack.us/i/imag0613.jpg/)


http://img248.imageshack.us/img248/4311/imag0614.jpg (http://img248.imageshack.us/i/imag0614.jpg/)

[spankybronx]

Time for something new....

[/URL][URL="http://www.abload.de/image.php?img=dsc0173695jb.jpg"]http://www.abload.de/img/dsc0173695jb.jpg (http://www.abload.de/img/dsc0173695jb.jpg)

[zapatero]

^^ Very nice HK.

[Arnie100]

Agreed! Definetely a sweet HK!

[Dunhill]

after some painting time...

http://www.freeimagehosting.net/uploads/fad867add7.jpg (http://www.freeimagehosting.net/)

http://www.freeimagehosting.net/uploads/00ca48a50f.jpg (http://www.freeimagehosting.net/)

[Kap]

lol?

What is with the ****ing rubber binders fetish with everyone now? First it was stupid foamy earplugs in the stocks, now it is rubber binders. You do realize in HIGH heat (like the desert *cough* Iraq & Afghanistan *cough*) They will NOT last long because they will dry up and snap right off. :|

The binders on your PEQ box should be 550 cord, binders will not secure a PEQ box like it should BTW.

[Yarrick2]

Lasgun:
http://i21.photobucket.com/albums/b272/flyinggoldfish/Airsoft/DSCF8488.jpg
do want! well with a wood stock and fore-end.

[Red_Fern]

lol?

What is with the ****ing rubber binders fetish with everyone now? First it was stupid foamy earplugs in the stocks, now it is rubber binders. You do realize in HIGH heat (like the desert *cough* Iraq & Afghanistan *cough*) They will NOT last long because they will dry up and snap right off. :|

The binders on your PEQ box should be 550 cord, binders will not secure a PEQ box like it should BTW.

Rubber bands are teh new 550 lulz :cantbeli:
But yeah, Kap has a point. Plus 550 cord looks more hi-speed than rubber bands.

[ShooterJay]

TAC, damn that is a sweet rifle. How'd you get the paint scheme like that?

[Rhodius3D]

WA M4, It's slowly getting to what i want it to look like....just need a few more things.

[dwight]

Its pretty nice, I'm only more a fan of a longer barrel. but he its your rifle and it looks nice.
maybe a paintjob, but thats on you.

[Rhodius3D]

Thanks!! Paint jobs are not my thing as i always f##k them up. But i am thinking of getting a few green parts for it ( handgard and buttstock) still a long way to go....

[dwight]

Thanks!! Paint jobs are not my thing as i always f##k them up. But i am thinking of getting a few green parts for it ( handgard and buttstock) still a long way to go....

You could make it green like the dutch commando's used to issue them.
Now they dont issue them green because the commando's always paint them an other color, like desert. So it would be stupid to waste paint on it. But for you, why not.

let me google an imagen of a green C8 for you.

http://i568.photobucket.com/albums/ss129/Dwight2741994/C090618LvW2744.jpg

Here, everything is green. exept for the RIS, the mag and the sight ofcourse.
this was the standart issue C8 carbine for the dutch army SF. All others just issued them black.

[Rhodius3D]

Thanks its not a bad idea!!

[dwight]

Youre welcome;)

Show us some pics of the end result if you decide to do so.

[Victory]

It's been awhile since I've airsoft'd, so I was thinking about buying a beater D-Boys or A&K M4 so I could attend a couple games this summer.

Instead of going that route, I've been thinking about using M4 parts that I have that refuse to sell to piece together a skirmish rifle. Using the parts that I have, this is what I've come up with.

http://i222.photobucket.com/albums/dd89/Victory0985/M468/M468Parts1.jpg

Technically, it's most like a M468 with a REC7 upper. (With the dredded magwell thing. I use it as a vertical foregrip.)

I'm in the process of purchasing a stock tube, mechbox, outer barrel, selector switch, and other parts.

I'm thinking about spraying a camouflage pattern on the metal body, stock, stock tube, and barrel with Krylon, as it is a skirmish/utility rifle.

Thoughts?

-Vic

P.S. I forgot to jam ear plugs into my stock's sling mount. Sorry Kap. :lol:

[Kap]

Ahahah nice rifle, but a dam Duostock?

[Victory]

Ahahah nice rifle, but a dam Duostock?

You don't like 'em? Due to the size or shape?

It has worked pretty well for me thus far.

I origionally bought it (second hand, got a good deal on it) for the IAR I was working on, as it's height is great for use with a bi-pod, as it acts as an...erm, third leg. Kinda' like a monopod, I suppose.

I'd like to eventually swap it out for a Magpul MOE, but I'm thinking it'll work pretty well for me for the time being.

-Vic

P.S. Come to think of it...the Duostock was the origional boot-stock, haha. Move over, SCAR!

[Bro Jangles]

(With the dredded magwell thing. I use it as a vertical foregrip.)

you called? hahaha jk

[Victory]

I was waiting for you, haha.

Surprisingly...it wouldn't sell. So here it is. ;-)

-Vic

[Seiran]

It's been awhile since I've airsoft'd, so I was thinking about buying a beater D-Boys or A&K M4 so I could attend a couple games this summer.

Instead of going that route, I've been thinking about using M4 parts that I have that refuse to sell to piece together a skirmish rifle. Using the parts that I have, this is what I've come up with.

http://i222.photobucket.com/albums/dd89/Victory0985/M468/M468Parts1.jpg

Technically, it's most like a M468 with a REC7 upper. (With the dredded magwell thing. I use it as a vertical foregrip.)

I'm in the process of purchasing a stock tube, mechbox, outer barrel, selector switch, and other parts.

I'm thinking about spraying a camouflage pattern on the metal body, stock, stock tube, and barrel with Krylon, as it is a skirmish/utility rifle.

Thoughts?

-Vic

P.S. I forgot to jam ear plugs into my stock's sling mount. Sorry Kap. :lol:

Holy balls that's one ungodly monster... but I likes!

[Arnie100]

Yeah, something about the Duostock, I dunno. Other then that, the rifle's fine.

[Red_Fern]

Victory, don't change a thing. Lots more OMFG D3L74 1337 S4S H1SP33D than my weapon. I think it's neat.

The stock is "different"... I think that's why it's cool. It's set apart from all the other M4s we see here, you know?

[Kap]

You don't like 'em? Due to the size or shape?

It has worked pretty well for me thus far.

I origionally bought it (second hand, got a good deal on it) for the IAR I was working on, as it's height is great for use with a bi-pod, as it acts as an...erm, third leg. Kinda' like a monopod, I suppose.

I'd like to eventually swap it out for a Magpul MOE, but I'm thinking it'll work pretty well for me for the time being.

-Vic

P.S. Come to think of it...the Duostock was the origional boot-stock, haha. Move over, SCAR!

I don't like the shape, but they are pretty effective. I got to play around with one before, and works well for any super bulky armor.

[Bro Jangles]

Vic, those the MBUS sights?

[Kap]

Vic, those the MBUS sights?

They appear to me that they are.

[Victory]

Yeah, they are. I origionally purchased them for a real rifle, as I had planned on buying a LWRC M6A2.

The M6A3 went on sale, so I went with that, instead.

Whenever I buy a RA XCR (It'll be awhile, I'm sure.), I'll steal them from my airsoft gun, and use them on there.


Victory, don't change a thing. Lots more OMFG D3L74 1337 S4S H1SP33D than my weapon. I think it's neat.

The stock is "different"... I think that's why it's cool. It's set apart from all the other M4s we see here, you know?

Yeah, I see what you are saying about it being different.

Duostock? Check.
Russian Optic? Check.
A.R.M.S. S.I.R. 2 Replica? Check.
Magwell thing? Check.
Barrett M468 6.8 SPC base? Check.
Somewhat wonky-looking rifle that's different from the norm? Check.

And, about it being teh 1337, I am OMFG D3L74 1337 S4S H1SP33D, therefore, my rifle should be OMFG D3L74 1337 S4S H1SP33D. rofl

-Vic

[Bro Jangles]

sweet, MBUS will be appearing on my rifle.


i may even get one of those magwells......... **** that..

[juliet.alphA]

http://i120.photobucket.com/albums/o194/a_inton/Weps/M14EBRPaintjob001.jpg
http://i120.photobucket.com/albums/o194/a_inton/Weps/M14EBRPaintjob002.jpg
http://i120.photobucket.com/albums/o194/a_inton/Weps/M14EBRPaintjob003.jpg
http://i120.photobucket.com/albums/o194/a_inton/Weps/M14EBRPaintjob004.jpg

[Arnie100]

Nice! An EBR, we don't see much of those here! What make?

[mrmojorisin124]

Thats a great paint job man!

[Kap]

Nice paint job, except that's why I just went with a 1 color base... The paint comes off too easy, so any pretty paint is almost a waste :( I beat my rifles pretty bad.

[Squeezee]

Very nice EBR, I'm happy to see one with a nice paintjob instead of chrome!

[Dunhill]

lol?

What is with the ****ing rubber binders fetish with everyone now? First it was stupid foamy earplugs in the stocks, now it is rubber binders. You do realize in HIGH heat (like the desert *cough* Iraq & Afghanistan *cough*) They will NOT last long because they will dry up and snap right off. :|

The binders on your PEQ box should be 550 cord, binders will not secure a PEQ box like it should BTW.

rubber bands are in the peq only to fit the bttery cable and plug, and in the stock to fit the cyalume (also fitted with paracord)

[Victory]

Thats a great paint job man!

Agreed, it's very nice. :)


When I paint my rifles, I usually stick with a maximum of two colors. Usually a FDE-like base color, and then some brown (stripes or whatever) over that. It can sometimes help break up the rifle's outline a little bit more (depending on your environment, of course), and it's simple enough for it to get scratched/rubbed off, and for me not to care about it much.

-Vic

Edit: Oh, and I ordered a stock tube and an outer barrel. I just need a selector, a gearbox, a motor, and some Krylon.

[juliet.alphA]

Thanks for all the comments, guys. It's a Kart EBR. I kinda rushed towards the end with the paint job though because it was getting dark outside. :oops:

[Kravensas]

Nice paint job, except that's why I just went with a 1 color base... The paint comes off too easy, so any pretty paint is almost a waste :( I beat my rifles pretty bad.

"ruined paint" look is sexxy

@juliet.alphA: nice jobs! how you made it?
It's a Kart EBR?

[hjs032570]

Here is my AEG updated.

http://i211.photobucket.com/albums/bb37/hjs032570/vltorm4.jpg
http://i211.photobucket.com/albums/bb37/hjs032570/vltorm42.jpg
http://i211.photobucket.com/albums/bb37/hjs032570/vltorm4front.jpg

-Noveske KFH Replica.
-Vltor Front Flip Up Sight Replica.
-Daniel Defense Lite 9.5 RAS Replica.
-Surefire Helmet Light Replica
-Surefire Scout Light Replica.
-King Arms Vertical Grip.
-Matrix Deluxe Tactical Laser.
-EOTech 556 Replica.
-King Arms VLTOR MUR Update Metal Body.
-JBU Arms Buis flip up sight.
-G&P Knights SR-15 Trigger Guard.
-Magpul MOE Grip.
-Magpul ASAP Sling Adaptor.
-King Arms LiPo (Fits in Buffer Tube and can close to 2nd Position.)
-Vltor E Mod stock Replica.
-Extra Hop Up with Longer Prometheus Inner Barrell for longer Engagements.
-Extra Outer Barrel with Troy Replica Muzzle Brake.
-Complete Systema Gearbox with Marui M1100 Motor.

I must thank Trevor from ASC, since the bulk of the gun is modelled after his.

Thanks for looking.

[Arnie100]

Now that's pretty!

[Layos005]

very nice rifle hjs032570 , along with a very nice computer set-up in the background :):)

[Red Command NZ]

lol i didnt even notice the computer until you mentioned it:)


oh and btw, WOW nice rifle

[callsign_blackskull]

79794

My M933

[SnoeDae]

helmet light on your rifle? who told you to do that?

[Red_Fern]

helmet light on your rifle? who told you to do that?

Teh H1SP33D D3L74SASOMFGKSKSp3tsn4z chairsofters?

[hjs032570]

Hello, thanks for the feedback. Chairsofter wannabe here. I saw a helmet light used on a rifle on the military morons website. Looked tacticool and figured it was something not seen on many guns. Here is the pic.

http://i211.photobucket.com/albums/bb37/hjs032570/SFrailmount9.jpg

[Victory]

The Surefire helmet lights are good as a navigation lighting system.

I'd much rather use 3 white LEDs or 2 red LEDs than a 100+ lumen Surefire for navigation. I wouldn't want to blind myself or give away my position trying to unlock a door in close quarters.

And no, I don't see myself in the above situation anytime soon, as I don't play night games as much as I'd like to. The above would be my reasoning for mounting such a system to a rifle.

-Vic

P.S. I wouldn't mount it behind the BUIS as shown in the Military Morons picture, though. A lot of that light will shine on the BUIS, giving the enemy (if he so happens to spot you with your light activated) a nice target to aim at. That, and if you have to deploy the BUIS, you'll loose the ability to use the light. That's my two cents.

[hjs032570]

Teh H1SP33D D3L74SASOMFGKSKSp3tsn4z chairsofters?

LOL, very funny!!!

[hjs032570]

The Surefire helmet lights are good as a navigation lighting system.

I'd much rather use 3 white LEDs or 2 red LEDs than a 100+ lumen Surefire for navigation. I wouldn't want to blind myself or give away my position trying to unlock a door in close quarters.

And no, I don't see myself in the above situation anytime soon, as I don't play night games as much as I'd like to. The above would be my reasoning for mounting such a system to a rifle.

-Vic

P.S. I wouldn't mount it behind the BUIS as shown in the Military Morons picture, though. A lot of that light will shine on the BUIS, giving the enemy (if he so happens to spot you with your light activated) a nice target to aim at. That, and if you have to deploy the BUIS, you'll loose the ability to use the light. That's my two cents.

Exactly what my intention was, plus it looks tacticool!

[SnoeDae]

i agree it would be better for navigation. i'm just curious as to why you would choose to put it on your rifle when it would serve better on your helmet, hat, or chest...

no flaming intended here, by the way. just conversation.

[hjs032570]

No offense taken:).

Better off on rifle than chest(In my opinion.). Helmet is probably the best option, but I look more H1SP33D D3L74SASOMFGKSKSp3tsn4ztacticool this way. :)

[Red_Fern]

It looks neat, I just haven't seen it before. Neat concept, though. Whatever works.

[hjs032570]

It looks neat, I just haven't seen it before. Neat concept, though. Whatever works.


Thus I achieved my goal:).

[Red_Fern]

Then I'd say you're good to go.

What kind of setup do you use that rifle for? CQB or is it just a general-purpose weapon that's good for most game types?

[hjs032570]

Current setup is for CQB. I have an extra longer hop up unit with a Prometheus tight bore barrell and outer barrell adaptor for the longer types of engagements. With the longer outer barrel I run a Troy muzzle brake flashhider.

Before Pics.
http://i211.photobucket.com/albums/bb37/hjs032570/DDVltorM4Sytema.jpg
http://i211.photobucket.com/albums/bb37/hjs032570/DDVltorM4Sytema1.jpg

After Pics.
http://i211.photobucket.com/albums/bb37/hjs032570/vltorm42.jpg
http://i211.photobucket.com/albums/bb37/hjs032570/vltorm4.jpg
http://i211.photobucket.com/albums/bb37/hjs032570/vltorm4front.jpg

The top pics show the longer inner barrel and outer barrel adapter and muzzle brake.

I like the current setup now because the replica scout light is better than the replica M962 light and the scout light is much lighter than the M962 light.

Update pics include the Magpul ASAP adaptor, and Sling adaptor on the RAS because the built in adaptors are not truly functional.

I tried the helmet light on the RAS one day and did not like how it reduced my FOV at first, but it looked hella cool with the blue lights and the laser on.

Thanks for the feedback.

[Red_Fern]

I'm not sure on this, but I don't think you have enough magazines. rofl rofl

Cool setup though, for real.

[hjs032570]

LOL. All midcaps with 120 bb capacity. Running out of ammo is not a concern.

Thanks!!!

[Xmith]

Hey hjs, you got a niice carbine there! May you tell me more about that, power, base aeg for your work and pieces used on upgrading process.

Cheers

[Victory]

It's been awhile since I've airsoft'd, so I was thinking about buying a beater D-Boys or A&K M4 so I could attend a couple games this summer.

Instead of going that route, I've been thinking about using M4 parts that I have that refuse to sell to piece together a skirmish rifle. Using the parts that I have, this is what I've come up with.

(Pic Edited Out To Save Space)

Technically, it's most like a M468 with a REC7 upper. (With the dredded magwell thing. I use it as a vertical foregrip.)

I'm in the process of purchasing a stock tube, mechbox, outer barrel, selector switch, and other parts.

I'm thinking about spraying a camouflage pattern on the metal body, stock, stock tube, and barrel with Krylon, as it is a skirmish/utility rifle.


Update:

http://img24.imageshack.us/img24/5877/partsgun1.jpg

Now with added PEQ-15! (+25,000 Tactical Points)

The stock tube and barrel arrived. I thought sure that the King Arms barrel would be 14mm-...turns out, it's 14mm+, so I'm limited, in that I won't be able to use the 14.5" barrel extension or the mock suppressor I have lying around. :cantbeli: I'll eventually swap it out for a 14mm- outer barrel.

Instead of painting, I decided to use a tan Guarder upper on the M468 lower. I'm not sure of the final result...half of me likes it. The other half is, well, unsure. I also have the option of swapping the black Duostock for a tan one. I'm unsure on that one, as well.

Still need: Internals, Inner Barrel, Selector Switch, Trigger Guard Pin (Which will be a PITA to find.)

-Vic

[Bro Jangles]

i say make the upper and lower match(preferably make both Black) plus go with the tan stock.

[Kap]

Update:

http://img24.imageshack.us/img24/5877/partsgun1.jpg

Now with added PEQ-15! (+25,000 Tactical Points)

The stock tube and barrel arrived. I thought sure that the King Arms barrel would be 14mm-...turns out, it's 14mm+, so I'm limited, in that I won't be able to use the 14.5" barrel extension or the mock suppressor I have lying around. :cantbeli: I'll eventually swap it out for a 14mm- outer barrel.

Instead of painting, I decided to use a tan Guarder upper on the M468 lower. I'm not sure of the final result...half of me likes it. The other half is, well, unsure. I also have the option of swapping the black Duostock for a tan one. I'm unsure on that one, as well.

Still need: Internals, Inner Barrel, Selector Switch, Trigger Guard Pin (Which will be a PITA to find.)

-Vic

Uhhhhh, you're a dork... There are adapters in this world now that make barrel ends either 14mm+ to 14mm- or 14mm- to 14mm+. It only adds about a half inch to the barrel, I use one on my PTW (14mm+ to a 14mm-) So I can use a wider variety of flash hiders and tracer units.

[Victory]

Yep, I used to have one. (14mm- to 14mm+, though.)

They're $15.00 plus shipping (about $7.00) from Evike. Its cheaper to buy a second hand outer barrel. :)

And about the upper, yeah, I'll probably swap it out for the black one.

-Vic

[Red_Fern]

BAMF rifle, Vic! Looks like something from Ghost Recon or CoD4. Regardless it looks neat all the same.

Any other modifications planned?

[hjs032570]

Hey hjs, you got a niice carbine there! May you tell me more about that, power, base aeg for your work and pieces used on upgrading process.

Cheers

I had parts in mind, so I really started from scratch. I bought a complete Systema gearbox and built the AEG from parts I wanted. I actually bought the gearbox a long time ago. I had a old TM M4 RIS that I had and broke. From that AEG I learned how to build AEGs. I was going to put it in the M4 when it broke. The only thing I am not 100% sure about is complete gearbox builds, so that was why I just bought a Systema gearbox. I finally decided to do the build when I started to see the Daniel Defense 9.5 Lite Rail Replica on some websites. I really liked the look of the Noveske flash hider, the Vltor flip up sight and the Daniel Defense RAS. Trevor from Airsoft Canada had a Systema build like this and my build is based of his build. Here is the link.
http://www.airsoftcanada.com/showthread.php?t=63995&highlight=trevor
As you can see I gave Trevor credit for the build and made sure he was okay with me biting off of his. Trevor did say he got his idea from other builds. The Vltor receiver was a no brainer. From there it was a matter of tweaking the other parts. This was a REALLY easy build!!

[hjs032570]

Update:

http://img24.imageshack.us/img24/5877/partsgun1.jpg

Now with added PEQ-15! (+25,000 Tactical Points)

The stock tube and barrel arrived. I thought sure that the King Arms barrel would be 14mm-...turns out, it's 14mm+, so I'm limited, in that I won't be able to use the 14.5" barrel extension or the mock suppressor I have lying around. :cantbeli: I'll eventually swap it out for a 14mm- outer barrel.

Instead of painting, I decided to use a tan Guarder upper on the M468 lower. I'm not sure of the final result...half of me likes it. The other half is, well, unsure. I also have the option of swapping the black Duostock for a tan one. I'm unsure on that one, as well.

Still need: Internals, Inner Barrel, Selector Switch, Trigger Guard Pin (Which will be a PITA to find.)

-Vic

Frankenstein build, like mine but I like it!!!!

[tactical73]

hjs ,very nice rifle ;-)

[hjs032570]

What is your preference?

http://i211.photobucket.com/albums/bb37/hjs032570/ddvltorLaimpoint.jpg
http://i211.photobucket.com/albums/bb37/hjs032570/ddvltorRaimpooint.jpg
http://i211.photobucket.com/albums/bb37/hjs032570/ddvltorfaimpoint.jpg

OR

http://i211.photobucket.com/albums/bb37/hjs032570/vltorm42.jpg
http://i211.photobucket.com/albums/bb37/hjs032570/vltorm4.jpg
http://i211.photobucket.com/albums/bb37/hjs032570/vltorm4front.jpg

Feel free to give me feedback on your opinions.

[Layos005]

the first setup looks so plain and empty. i like the second setup. but thats just my opinion.