RomanS
03-29-2004, 07:46 PM
I know some of you guys were interested in the Russian Internal Forces helmet SPHERA(СФЕРА)
There is not much information out there, so I decided to share some (i'm not an expert in it either :oops: ) that I know
I brought one back from Russia, and did a photo shoot of it in my house last night. I gathered a simple OMON - SOBR officer's gear, and snaped some shots.
I wanted to capture the helmet in details for you all.
So lets start.
As far as I know the helmet is been in use during the late 80s.
Russians were testing the newest protection for their Internal soldiers. The old pot was getting old, un-comfy and rugged.
The development of the new helmet was on the run because of problems in the country with other republics. Based on the war in Afgan, the Ministery developed a new fully customizable helmet.
http://www.gunsnet.net/album/data//500/6673IMG_3834.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3841.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3838.jpg
The SPHERA helmet issues with a "special" made bag (ill take photos of it if needed), but really nothing spectacular, just another canvas bag.
The contents include
Helmet body
Left side Steel plate
Right side Steel plate
Top cover steel plate
laces
VSR cover
SNOW cover
http://www.gunsnet.net/album/data//500/6673IMG_3796.jpg
First is the Helmet body. Made out of nylon head cover.
http://www.gunsnet.net/album/data//500/6673IMG_3791.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3792.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3793.jpg
This is where you put the plates, and lace them up.
First goes the side plates that will protect your ears and the side of your head. You just simply insert them into the slots, and lase the first layer.
http://www.gunsnet.net/album/data//500/6673IMG_3799.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3800.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3801.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3803.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3807.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3809.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3811.jpg
So now the first layer of Steel is laced up, and time to put the top one on. You can custumize it however you need it by moving the plate lower or higher. After puting the last top layer plate, I laced it the same way as the side plates.
http://www.gunsnet.net/album/data//500/6673IMG_3812.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3814.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3816.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3818.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3819.jpg
Now all you have to do is to cover the last part with front, and back straps. You can see the velcro tape on it. After that, its done and ready for your choice of cover.
http://www.gunsnet.net/album/data//500/6673IMG_3821.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3823.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3828.jpg
The covers come in many cammo patterns. Almost anyone you need.
My favorite is VSR.
http://www.gunsnet.net/album/data//500/6673IMG_3829.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3831.jpg
Ready to go.
It is a very comfortable helmet, and the best part about it is custumization. On the weight scale, it is not the heavies thing on the planet, but it is heavier than Kevlar. Don't forget it has STEEL plates for extra protection.
It actually saved a lot of guys lifes.
Enjoy the poster style shots hehehe
http://www.gunsnet.net/album/data//500/6673IMG_3836_copy.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3838.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3841.jpg
if you guys wanna see more Russian gear like this, please let me know.
http://www.gunsnet.net/album/data//500/6673IMG_3843.jpg
There is not much information out there, so I decided to share some (i'm not an expert in it either :oops: ) that I know
I brought one back from Russia, and did a photo shoot of it in my house last night. I gathered a simple OMON - SOBR officer's gear, and snaped some shots.
I wanted to capture the helmet in details for you all.
So lets start.
As far as I know the helmet is been in use during the late 80s.
Russians were testing the newest protection for their Internal soldiers. The old pot was getting old, un-comfy and rugged.
The development of the new helmet was on the run because of problems in the country with other republics. Based on the war in Afgan, the Ministery developed a new fully customizable helmet.
http://www.gunsnet.net/album/data//500/6673IMG_3834.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3841.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3838.jpg
The SPHERA helmet issues with a "special" made bag (ill take photos of it if needed), but really nothing spectacular, just another canvas bag.
The contents include
Helmet body
Left side Steel plate
Right side Steel plate
Top cover steel plate
laces
VSR cover
SNOW cover
http://www.gunsnet.net/album/data//500/6673IMG_3796.jpg
First is the Helmet body. Made out of nylon head cover.
http://www.gunsnet.net/album/data//500/6673IMG_3791.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3792.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3793.jpg
This is where you put the plates, and lace them up.
First goes the side plates that will protect your ears and the side of your head. You just simply insert them into the slots, and lase the first layer.
http://www.gunsnet.net/album/data//500/6673IMG_3799.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3800.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3801.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3803.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3807.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3809.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3811.jpg
So now the first layer of Steel is laced up, and time to put the top one on. You can custumize it however you need it by moving the plate lower or higher. After puting the last top layer plate, I laced it the same way as the side plates.
http://www.gunsnet.net/album/data//500/6673IMG_3812.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3814.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3816.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3818.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3819.jpg
Now all you have to do is to cover the last part with front, and back straps. You can see the velcro tape on it. After that, its done and ready for your choice of cover.
http://www.gunsnet.net/album/data//500/6673IMG_3821.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3823.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3828.jpg
The covers come in many cammo patterns. Almost anyone you need.
My favorite is VSR.
http://www.gunsnet.net/album/data//500/6673IMG_3829.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3831.jpg
Ready to go.
It is a very comfortable helmet, and the best part about it is custumization. On the weight scale, it is not the heavies thing on the planet, but it is heavier than Kevlar. Don't forget it has STEEL plates for extra protection.
It actually saved a lot of guys lifes.
Enjoy the poster style shots hehehe
http://www.gunsnet.net/album/data//500/6673IMG_3836_copy.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3838.jpg
http://www.gunsnet.net/album/data//500/6673IMG_3841.jpg
if you guys wanna see more Russian gear like this, please let me know.
http://www.gunsnet.net/album/data//500/6673IMG_3843.jpg