My next project is the G3A4.
I have a CA G3A4 and If I put the CA G3 RAS on it, will any batterys fit inside the RAS then?
In my G36KA1 I had AK-stick type batterys inside the RAS. Will they fit here too?
AN/PEQ is not an option!
I have a RAS on my G3 and I must say, I don't think you will be able to get a battery in there. Also you would have to modify your wiring to the front and possibly drill a hole in the front part of the rifle where you put the handguard on. Batteries are getting smaller and smaller as time goes on, but you might be able to get away with a slim line LIPO battery. But your internals will have to be modified in order to take the power of a LIPO without stripping everything you have inside your gear box. I haven't touched my G3 since May of last year (due to deployment), so someone else might be able to help you a little better than I can. Hope this has helped somewhat, goodluck on your project if it is successful, I would like to know how it goes so I can fully attempt it myself. I would like a G3A3 for my collection as well.
From Sunday's "game", only 5 people turned up due to weather, so it became more of a lunch+photo session
The snow was too deep to move in without skis, so we stuck close to the road:
Higher res, This pic came out blurred, probably because the camera knew I'm a ninja. Or there was snow on the lense.
Miltec Under-armour shirt, flecktarn
BW gloves, old type, gray leather
BW M2000 boots (or I might have used Norwegian M77's, I don't recall)
Gefechtshelme with white/flecktarn cover
BW Splitterschutzwesten (flak vest) - stand in for IdZ Sk4 Schutzweste, which I can't find available, and it would probably expensive.
IdZ Kampfmitteltrageweste with:
*4x G36 2x mag pouches
*1 LMG pouch (good for multi-use, or for storing extra mags)
*1 canteenpouch, with 3000 KSC .30g BB's and a speedloader
*1 small radio pouch with 1 small 446-radio
*1 Sem 52 pouch, with a Marconi Bowman radio connected to the 446
*1 Hydration backpack, attached to the back of the vest with straps
*1 dropleg-dump pouch
*1 2.5l hydration bladder in internal vest back pocket
* + leatherman, cigs, lighter and some old ###### in the inner pockets
G36V with EOTech, mp7 BUIS, bipod, improvised snow-camo and adjustable V-stock.
In my world its the G3A3 that has the normal stock!?
Am iwrong, do I got you wrong here mate...??
About Lipo, the 7,4v version would work great with the Std internals? My shop recomend 9,6v to the gun...??
What do you say man? Is it possible?
I will upgrade it later on but I have a event I have to be on with this beuty first...
I have forgotten about that model of an airsoft gun, I was speaking about modifying a regular CA M41, or just the G3A3. So just forget I said that. If you change the handguard in that G3A4 into the RAS, I do not know if the LIPO will fit, but it's worth a try, start off with a 7.4V first, because both G3A3s I bought last year broke within 100-200 rounds of using a standard non LIPO 9.4V large battery.
P.S. nice photos Panzergraf. I would love to play in snow like that, hehe
Ive also spoke to my dealer about the RAS, they said smalltype batterys would fit inside the RAS!???
Maybe even the stick type!?
time will tell, Ive ordered the RAS now and I will post the outcome here...
Yes, please post the outcome, because I want to produce a functional G3A4 as well with a RAS without having to have a battery bag or a PEQ to hide a battery. I'm pretty confident a small stick, or a slim-line battery will fit into a RAS handguard.