MP.net Auto Service Center

[Death.]

I hear ya, I have a rotary sitting here with ceramic 30mm seals and HP o-rings. The machine work is what is gonna set me back and a light weight rotor. I have a weighted flywheel but need many other things including injectors.



Ok you can stay but you must lay a strip so long in that pepped up 6 that you blow a tire. I mean youtube stuff no exceptions.

Okay well I'll have that video up in August..sound good? lol
I could do that now with the stock 6, but you would have to accept a 1 wheel peel, and a slow rotation. lol

[shorty]

An 87 RX7, it is black, 5sp and I have a turbo ECU and harness so I plan on that as well. Dad's projects he gets me in take away from my old car. I have had it since High School so it is special.

LS1....You know you wanna do it!

[shocker1]

Okay well I'll have that video up in August..sound good? lol
I could do that now with the stock 6, but you would have to accept a 1 wheel peel, and a slow rotation. lol

No brake torque tricks, I drive V6 Stangs every week at the lot. None will do a brake free tire chewing squall. Nope none.

LS1....You know you wanna do it!

All right now that is exactly what my dad and my friends want to do. I like the rotary.

[shorty]

All right now that is exactly what my dad and my friends want to do. I like the rotary.

Haha, we are sane!

You seen the Civette? The Civic with the bowels of a Vette put in it? Very dope!

[shocker1]

Haha, we are sane!

You seen the Civette? The Civic with the bowels of a Vette put in it? Very dope!

Somebody was on dope? I do remember the Chevette, po mans Corvette.
How about this beast?

[Death.]

No brake torque tricks, I drive V6 Stangs every week at the lot. None will do a brake free tire chewing squall. Nope none.


All right now that is exactly what my dad and my friends want to do. I like the rotary.

My tire (singular) breaks loose on launch from idle. [img]http://www.***********.com/pictures/smilies/yes.gif[/img]

Here's why.



I could always do a donut and never have to touch the brakes, they're more interesting to do and watch then a burnout anyway.

[shocker1]

Rig you up some Armorall to spray on the tire with a switch. Like the traction compound option on 69 Z28 s but with the opposite effect. there were guys up in Pigeon Forge at the Grand Run cruising the strip in granny's Cavalier with some crap like that. They were smoking up the front tires something fierce and all the redneck drunks in lawn chairs approved.

Nice even tread wear on that tire.

[shorty]

Somebody was on dope? I do remember the Chevette, po mans Corvette.
How about this beast?

HOLY SH*T he actually ran that??? What did it trap?

I'll try to find the Civette streetfire vid....

[Death.]

Hahaha..I usually see using an aid to spin the tires (other then water in the burnout boxes for obvious reasons) like bleach, tire shine etc as kind of a ricer/dip**** thing to do.

[shocker1]

http://www.brainerdracing.com/photos/scan7084.jpg
Another view of that monster

I think he ran low 5, I will have to check on that but it is perfectly reasonable.

Hahaha..I usually see using an aid to spin the tires (other then water in the burnout boxes for obvious reasons) like bleach, tire shine etc as kind of a ricer/dip**** thing to do.

They were not that high speed, they had a Cavalier of all things. I had to check it out and they did a jam up rigging on the "compound" dispenser.

[shorty]

http://videos.streetfire.net/video/0...f301249aa3.htm

Check that out. Good lord. Only way I'd drive a Honduuh.

[Death.]

http://videos.streetfire.net/video/0...f301249aa3.htm

Check that out. Good lord. Only way I'd drive a Honduuh.

You see the Evo 8 that they changed to RWD and dropped an LS1 in? Some middle-eastern country if I'm not mistaken, sounded awesome, no traction. lol

[shorty]

http://www.metacafe.com/watch/715243...civic_civette/

[Death.]

Oh, shocker, not to make you blow a gasket or anything, but I thought I'd show you this.

First over 500rwhp
First and only over 600rwhp
First and only 9 sec prduction block v6 stang

best 1/4 mile-9.83@136mph
best 1/8th mile-6.25@112
Best 60ft-1.41

[shorty]

Quote:
First over 500rwhp
First and only over 600rwhp
First and only 9 sec prduction block v6 stang

best 1/4 mile-9.83@136mph
best 1/8th mile-6.25@112
Best 60ft-1.41


So I can expect these numbers with 2 more cylinders, and more room to grow. NIIIIICE!

Just messing with ya bro! Thats pretty respectable.